PIONEERPOS G24-LC manual Store User Profile, 145 &W Parameters, Profile Parameters

UI (User Interface)

Example

at&v

ACTIVE PROFILE:

E1 Q0 V1 X4 &C1 &D2 &K3 &Y0

S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:004 S07:050 S08:004 S09:006 S10:014 S12:040 S14:AAH S16:80H S18:000 S21:30H S22:F6H S23:1BH S25:005 S26:001 S27:09H

STORED PROFILE 0:

E1 Q0 V1 X4 &C1 &D2 &K3

S00:000 S02:043 S03:013 S04:010 S05:008 S07:050 S12:040

STORED PROFILE 1:

E1 Q0 V1 X4 &C1 &D2 &K3

S00:000 S02:043 S03:013 S04:010 S05:008 S07:050 S12:040

OK

&W, Store User Profile

Command Type	Syntax	Response/Action	Remarks
Set	&W[<n>]	OK	The Set command stores the current
		or:	active configuration to user profile 0 or
		+CME ERROR: <err>	1.

The following table shows the &W parameters.

Table 3-145: &W Parameters

<Parameter>		Description
<n>	User’s profile number:
	0	Store to user’s profile 0
	1	Store to user’s profile 1
	The default value is 0.

The parameters that are set in a profile are described in the table below.

Table 3-146: Profile Parameters

Profile	Description	Parameter	Default	Length in
Parameter		Range	Value	Bits
ATE	Echo	0-1	1	1
ATQ	Result code return mode	0-1	0	1
ATV	Display result code	0-1	1	1
ATX	Select result code	0-4	0	3

3-222 G24-L AT Commands Reference Manual April 15, 2008