PIONEERPOS G24-LC manual +CRLP, Radio Link Protocol, 75 +CRLP Parameters, Network, Mws

Network

+CRLP, Radio Link Protocol

This command displays the Radio Link Protocol parameters that are used when non-transparent data calls are originated.

Command
Type	Syntax	Response/Action	Remarks
Set	+CRLP=	OK	The Set command enables
	[<iws>[,<mws>[,<T1>	or:	you to change the RLP
	[,<N2>]]]]	+CME ERROR: <err>	parameters.
Read	+CRLP?	+CRLP= <iws>,<mws>,<T1>,<N2>
		OK
		or:
		+CME ERROR: <err>
Test	+CRLP=?	+CRLP= (list of supported <iws>s),
		(list of supported <mws>s), (list of
		supported <T1>s), (list of supported
		<N2>s)
		OK
		or:
		+CME ERROR: <err>

The following table shows the +CRLP parameters.

	Table 3-75: +CRLP Parameters
<Parameter>	Description
<iws>	IWF to MS window size.
	The default value is 61.
<mws>	MS to IWF window size.
	The default value is 61.
<T1>	Acknowledgement timer T1.
	The default value is 48.
<N2>	Retransmission attempts N2 in integer format (refer to GSM 04.22 [18] subclause
	5.4.3)
	The default value is 15.

Example

AT+CRLP=?

+CRLP: (010-061),(010-061),(048-255),(006-015)

OK AT+CRLP?

+CRLP: 061,061,048,006

OK

3-118 G24-L AT Commands Reference Manual April 15, 2008