PIONEERPOS G24-LC +Cclk, Sms, +Csms, +Cpms, +Cmgf, +Csca, +Csmp, +Csdh, +Cnmi, +Cnma, +Cmti, +Cds

AT Commands Summary

Table 1-1: AT Commands (Cont.)

AT Command	Description	Page
System Date and Time Access Commands
+CCLK	This command reads/sets the G24-L's current date and time settings.	Page 3-73
SMS
SMS Commands
+CSMS	This command handles the selection of the SMS message service	Page 3-75
	type.
+CPMS	This command handles the selection of the preferred storage area for	Page 3-76
	messages.
+CMGF	This command handles the selection of message formats.	Page 3-77
+CSCA	This command handles the selection of the SCA and the TOSCA.	Page 3-78
+CSMP	This command sets the Text Module parameters.	Page 3-79
+CSDH	This command shows the Text Mode parameters.	Page 3-81
+CNMI	This command sends an unsolicited indication when a new SMS	Page 3-82
	message is received by the G24-L.
+CNMA	This command acknowledges the receipt of a +CMT response.	Page 3-84
+CMTI	This unsolicited message, including the SMS message index, is sent	Page 3-86
	upon the arrival of an SMS message.
+CMT	This unsolicited message displays the received SMS-DELIVER	Page 3-86
	message.
+CDSI	This unsolicited message indicates that a new	Page 3-88
	SMS-STATUS-REPORT message was received, and is stored
	in location <index>.
+CDS	This unsolicited message displays the received	Page 3-88
	SMS-DELIVER message.
+CMGL	This command displays a list of SMS messages stored in the G24-L	Page 3-89
	memory.
+MMGL	This command displays a list of SMS messages stored in the G24-L	Page 3-89
	memory.
+CMGR	This command reads selected SMS messages from the G24-L	Page 3-94
	memory.
+MMGR	This command reads selected SMS messages from the G24-L	Page 3-94
	memory.
+MMAR	This command changes the status of an SMS message in the G24-L	Page 3-101
	memory from "REC UNREAD" to "REC READ".
+CMSS	This command selects and sends pre-stored messages from the	Page 3-101
	message storage.
+CMGW	This command writes and saves messages in the G24-L memory.	Page 3-103
+CMGD	This command deletes messages from the G24-L memory.	Page 3-108

1-18 G24-L AT Commands Reference Manual April 15, 2008