PIONEERPOS G24-LC Basic Audio Setup Commands, General Audio Commands, +CRSL, Call Ringer Level

Audio

The default state is analog.

Power Up

Analog

A T+MA D IGITA L=1

Digital

Figure 3-5: Analog/Digital Switching

A T+MA D IGITA L=0

General Audio Commands

The following audio commands can be used in both Basic and Advanced audio modes.

General audio commands are: +CRTT, +VTD, +VTS, +CALM, +MMICG, +MADIGITAL.

Basic Audio Setup Commands

+CRSL, Call Ringer Level

This command handles the selection of the incoming call ringer and alert tone (SMS) sound level on the alert speaker of the G24-L. The new value remains after power cycle.

Command Type	Syntax	Response/Action	Remarks
Set	+CRSL=<level>	OK	The Set command sets the call ringer
		+CME ERROR: <err>	level.
Read	+CRSL?	+CRSL: <level>	The Read command displays the
		+CME ERROR: <err>	current ringer alert (SMS) sound level
			setting.????????
Test	+CRSL=?	+CRSL: (list of	The Test command displays the list of
		supported <level>s)	supported sound level settings.
		+CME ERROR: <err>

3-158 G24-L AT Commands Reference Manual April 15, 2008