PIONEERPOS G24-LC manual Table A-1 AT Commands Alphabetical, AT Command Description

		Appendix A: Reference Tables
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command	Description	Page
\G	This command sets the use of the	Page 3-197
	software control.
\J	This command adjusts the	Page 3-197
	terminal auto rate.
\K	This command is supported for	Page 3-304
	backward compatibility only, and
	has no effect.
\N	This command links the type.	Page 3-197
\S	This command displays the status	Page 3-197
	of selected commands and
	S-registers.
ATS97	This command indicates whether	Page 3-143
	an antenna is physically
	connected to the G24-L RF
	connector.
+CACM	This command resets the Advice	Page 3-46
	of Charge accumulated call meter
	value in the SIM file, EFACM.
+CALM	This command handles the	Page 3-171
	selection of the G24’s alert sound
	mode.
+CAMM	This command sets the Advice of	Page 3-47
	Charge accumulated call meter
	maximum value in the SIM file,
	EFACMmax.
+CAOC	This command enables the	Page 3-44
	subscriber to get information
	about the cost of calls.
+CBAND	This command is supported for	Page 3-197
	backward compatibility only, and
	has no effect.
+CBAUD	This command sets the baud rate.	Page 3-132
+CBC	This command enables a user to	Page 3-129
	query the battery charger
	connection.
+CBST	This command selects the bearer	Page 3-31
	service and the connection
	element to be used when data
	calls are originated.
+CCFC	This command enables control of	Page 3-27
	the call-forwarding
	supplementary service.

April 15, 2008 G24-L AT Commands Reference Manual A-3