Manuals / Brands / Computer Equipment / Network Card / PIONEERPOS / Computer Equipment / Network Card

PIONEERPOS G24-L, G24-LC +CMER, Mobile Equipment Event Reporting, +CLAN, ME Language

1 444

Download 444 pages, 3.68 Mb

Chapter 3: AT Commands Reference

April 15, 2008 G24-L AT Commands Reference Manual 3-225

+CMER, Mobile Equipment Event Reporting

The following table shows the +CMER parameters.

+CLAN, ME Language

This command handles the selection of language in the ME.

Command

Type Syntax Response/Action Remarks

Set +CMER=[<mode>

[,<keyp>[,<disp>

[,<ind>[,<bfr>]]]]]

or:

+CME ERROR: <err>

The Set command

enables/disables an external

accessory to receive event

reports from the G24-L. In

some cases, this is used to

track the user activity for

redisplay on a vehicle system,

or to perform accessory-spe-

cific menu operations.

Read +CMER? +CMER:

or:

+CME ERROR: <err>

The Read command queries

the current settings for the

AT+CMER command.

Test +CMER=? +CMER: (list of supported

<mode>s),(list of supported

<keyp>s),(list of supported

<disp>s),(list of supported

<ind>s),(list of supported <bfr>s)

The Test command returns

the possible <mode>,

<keyp>, <disp>, <ind>, and

<bfr> values.

Table 3-148:+CMER Parameters

<Parameter> Description

<mode> Controls the processing of unsolicited result codes specified within this command.

0 Buffer unsolicited result codes in G24-L

<keyp> Reserved for future implementation.

<disp> Reserved for future implementation.

<ind> 0 No indicator events reporting.

1 Indicator event +CIEV: <ind>,<value>.

<ind> shows the indicator order number and <value> is new value of indicator.

The default value is 0.

<bfr> Controls the effect on buffered codes.

0 Clear buffer.

Contents

Main SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice Copyrights Computer Software Copyrights VENDOR COPYRIGHT Usage and Disclosure Restrictions Page Page Table of Contents Page Page Page Page Page Page Page List of Figures Page List of Tables Page Page Page Page Page Preface Note: All references to G24-L also apply to G24-LC, except where otherwise noted. Manual Scope Target Audience Manual Organization Applicable Documents Contact Us Text Conventions Note Manual Banner Definitions Field Service General Safety Remember!. . . safety depends on you! Ground the instrument Keep away from live circuits Do not substitute parts or modify equipment Batteries Dangerous procedure warnings Caring for the Environment Disposal of Motorola equipment in EU countries Disposal of Motorola equipment in non-EU countries RoHS Compliance CMM Compliance Limitation of Liability Warranty Notification How to Get Warranty Service? Claiming Conditions What is Not Covered by the Warranty Installed Data Out of Warranty Repairs Revision History Chapter 1: Product Features Connectivity Interface GPRS Operation Features and Benefits CSD Operation Features and Benefits Technical Description Improved OEM Features SIM Application Toolkit (STK) Profile Download Data Transfer into the SIM Set up Idle Mode Text Menu Selection Call Control by SIM TCP/UDP IP Connection TCP/IP Creating TCP/IP Connections UDP/IP Creating UDP/IP Connections Page Audio Echo Suppression Noise Suppress Page Short Message Service (SMS) Features Technical Description Character Sets ASCII Character Set Management GSM Character Set Management UCS2 Character Set Management 8859-1 Character Set Management AT Commands Summary Page Page Page Page Page Page Page Page Page Page Page Chapter 2: Introduction to AT Commands AT Commands Overview General Symbols Used in AT Commands Description General System Abbreviations AT Commands Protocol AT Commands Structure Command Structure Results Code Structure Response and Indications Structure Chapter 2: Introduction to AT Commands April 15, 2008 G24-L AT Commands Reference Manual 2-5 AT Commands Protocol & Structure Configuration Figure 2-4: Flow and Structure Configuration Commands The figure below shows the flow and structure configuration commands: Command To ke n Ty pes Basic Syntax Command Format S-parameters Extended Syntax Command Format Command Argument Types Numeric Constants String Constants Command Mode Types Parameter Set Command Syntax Values Range of Values Compound Range of Values Aborting Commands Chapter 3: AT Commands Reference Modem ID Subscriber Unit Identity +CGMI, +GMI, +FMI, Request Manufacturer ID +CGMM, +GMM, +FMM, Request Model ID +CGMR, +GMR, +FMR, Request Revision +CGSN, +GSN, Request Product Serial Number Identification +CSCS, Select Terminal Character Set April 15, 2008 G24-L AT Commands Reference Manual 3-5 +CIMI, Request IMSI This command displays the International Mobile Subscriber Identity number. +CFSN, Read Manufacturing Serial Number This command is used to query the manufacturing serial number. Command Response/Action I, Request Identification Information +CNUM, Request MSISDN(s) Read Command The following table shows the +CNUM parameters. This command displays a list of all the AT commands supported by the G24-L. $, List of All Available AT Commands Table 3-3:+CNUM Parameters +CLAC, List of All Available AT Commands Capability Reporting Call Control Managing a CSD (Data) Call Simple Dialing Switching From Data Mode to Command Mode The Character Receiving a Data Call Call Control AT Commands D, Dial Command D>, Direct Dialing from Phone Books The following table shows a detailed description for the D> commands. Note: Current used memory (phone book) set/read is done through the memory command The following table shows the D> parameters. Table 3-5: D> Parameters DL, Dial Last Number H, Hang-up Call Page A, Answer Incoming Call +CRC, Cellular Result Codes and RING, +CRING - Incoming Call Indication RING/+CRING Indication The following table shows the +CRC parameters. Table 3-7:+CRC Parameters +CLIP, Calling Line Identification The following table shows the +CLIP parameters. Table 3-8:+CLIP Parameters +CCWA, Call Waiting Command The following table shows the +CCWA parameters. Note: When the parameter <mode> is 2 (Query status), the first parameter is ignored and the third parameter is always treated as class = 7. Table 3-9:+CCWA Parameters +CHLD, Call Related Supplementary Services Command Page Page Table 3-11:+CHLD Actions According to Call State and Operation (Cont.) +CCFC, Call Forwarding Number and Conditions Page +CLIR, Calling Line Identification Restriction Note: When a service is in state A, and the terminal wants to enable the CLI presentation (turn The following table shows the +CLIR parameters. Table 3-13:+CLIR Parameters +CBST, Select Bearer Service Type The following table shows the +CBST parameters. Table 3-14: +CBST Parameters O, Return to Online Data State &Q, Asynchronous Mode +CHUP, Hang Up Call +CSNS, Single Numbering Call Scheme Page Note: CSNS has read-only access to CBST data. +MDC, Selection of Desired Message to Be Displayed Upon Connection of a Voice Call Table 3-16:Mapping Table (V.34) +CTFR1, Divert an Incoming Call When User Busy +MVC, Motorola Vocoders Configuration The following table shows the +MVC parameters. Table 3-17: +MVC Parameters Call Status Messages +CPAS, Phone Activity Status The following table shows the +CPAS parameters. Table 3-18:+CPAS Parameters +CLCC, List Current Calls The following table shows the +CLCC parameters. Note: When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is prompted. Table 3-19:+CLCC Parameters +MCST, Call Status Messages +MCST Parameters The following table shows the +MCST parameters. Table 3-20: +MCST Parameters Call Advice of Charge Commands +CAOC, Advice of Charge April 15, 2008 G24-L AT Commands Reference Manual 3-45 Example with prepaid SIM card with 56700.00L prepaid before the test. There is now 46500.00L prepaid remaining on the SIM card. Therefore, the accumulated cost is equal to the current call cost. Note: The above example shows first time activation of the AOC feature using the G24-L. +CACM, Accumulated Call Meter The following table shows the +CACM parameters. Table 3-22: +CACM Parameters +CAMM, Accumulated Call Meter Maximum The following table shows the +CAMM parameters. Table 3-23: +CAMM Parameters +CPUC, Price per Unit and Currency Table The following table shows the +CPUC parameters. Table 3-24: +CPUC Parameters +CR, Service Reporting Control Supplementary Services +CSSN, Supplementary Service Notifications Set The following table shows the +CSSN parameters. Table 3-26:+CSSN Parameters Table 3-27: +CSSI Notification Values Table 3-28: +CSSU Notification Values Table 3-28:+CSSU Notification Values (Cont.) +CUSD, Unstructured Supplementary Service Data The following table shows the +CUSD parameters. Table 3-29: +CUSD Parameters Note: When the mobile-initiated operation is successful, the MS is implemented according to Table 3-30: CUSD Termination Cause Table Index (Cont.) +COLP, Connected Line Identification Presentation +MTTY, Motorola TTY Configuration Page Phone Books and Clock Directory Access Commands +CPBS, Select Phone Book Memory The following table shows the +CPBS parameters. +CPBR, Read Phone Book Entries Table 3-33:+CPBS Parameters The following table shows the +CPBR parameters. Table 3-34: +CPBR Parameters April 15, 2008 G24-L AT Commands Reference Manual 3-63 +CPBF, Find Phone Book Entries Command Type Syntax Response/Action Set Test +CPBW, Write Phone Book Entry Note: The "FD" phone book supports single wild card characters (?) and prefixes of a number The following table shows the +CPBW parameters. Table 3-36:+CPBW Parameters +CSVM, Set Voice Mail Server +MDSI, Motorola Deactivate SIM Card Indication The following table shows the +MDSI parameters. Table 3-38:+MDSI Parameters +MCSN, Motorola Change Subscriber Number The following table shows the +MCSN parameters. Table 3-39:+MCSN Parameters Phone Books and Clock 3-72 G24-L AT Commands Reference Manual April 15, 2008 System Date and Time Access Commands +CCLK, Read/Set System Date and Time This command reads and sets the G24-L current date, time and time zone. The following table shows the +CCLK parameters. Table 3-40:+CCLK Parameters SMS SMS Commands +CSMS, Select Message Service. +CPMS, Preferred Message Storage +CMGF, Message Format +CSCA, Service Center Address The following table shows the +CSCA parameters. +CSMP, Set Text Mode Parameters Table 3-45: +CSCA Parameters The following table shows the +CSMP parameters. Table 3-46:+CSMP Parameters Table 3-47:VP Relative Format (In Integer Format) +CSDH, Show Text Mode Parameters This command controls whether detailed header information is shown in text mode result codes. Table 3-47:VP Relative Format (In Integer Format) (Cont.) +CNMI, New Message Indications to Terminal The following table shows the +CNMI parameters. Table 3-49: +CNMI Parameters +CNMA, New Message Acknowledgment Page +CMTI, Unsolicited Response (New SMS-DELIVER Receipt Indication) +CMT, Unsolicited Response (New SMS-DELIVER Receipt) Page +CDSI, Unsolicited Response (New SMS-STATUS-REPORT Indication) +CDS, Unsolicited Response (New SMS-STATUS-REPORT Receipt) +CMGL, +MMGL, List Messages Page Page The following table shows the +CGML/+MMGL parameters. Table 3-54:+CGML/+MMGL Parameters April 15, 2008 G24-L AT Commands Reference Manual 3-93 +CMGR, +MMGR, Read Message The following table shows the +CMGR/MMGR parameters. Table 3-55: +CMGR/+MMGR Parameters Note: Any unused bits will be set to zero and will be ignored by the receiving entity. Table 3-56:Layout of SMS-DELIVER in PDU Mode (according to GSM03.40) Table 3-55:+CMGR/+MMGR Parameters (Cont.) Table 3-57: <fo> for SMS-DELIVER Message Table 3-58: Layout of SMS-STATUS-REPORT in PDU Mode (according to GSM03.40) Notes: Any unused bits will be set to zero by the sending entity and will be ignored by the Table 3-58: Layout of SMS-STATUS-REPORT in PDU Mode (according to GSM03.40) (Cont.) Table 3-59:<fo> for SMS-STATUS-REPORT Message Table 3-60: <TP-PI> for SMS-STATUS-REPORT Message 3-100 G24-L AT Commands Reference Manual April 15, 2008 +MMAR, Motorola Mark As Read +CMSS, Send Message From Storage +CMGW, Write Message to Memory Table 3-64:Layout of SMS-SUBMIT in PDU Mode: (according to GSM03.40) Table 3-65:Layout of SMS-COMMAND in PDU Mode: (according to GSM03.40) Table 3-66:<fo> for SMS-SUBMIT Message Table 3-65:Layout of SMS-COMMAND in PDU Mode: (according to GSM03.40) Note: Any unused bits will be set to 0. Table 3-67:<fo> for SMS-COMMAND Message April 15, 2008 G24-L AT Commands Reference Manual 3-107 +CMGD, Delete Message +CGSMS, Select Service for MO SMS Messages Note: This command is network dependent, which means that the network must support SMS over GPRS. The following table shows the +CGSMS parameters. Table 3-69:+CGSMS Parameters +CMGS, Send SM to Network +MCSAT, Motorola Control SMS Alert Tone The following table shows the +MCSAT parameters. Table 3-71: +MCSAT Parameters 3-112 G24-L AT Commands Reference Manual April 15, 2008 DCS handling Examples: Table 3-73:<dcs> field and +CSCS settings conversion when reading SM April 15, 2008 G24-L AT Commands Reference Manual 3-115 3-116 G24-L AT Commands Reference Manual April 15, 2008 Network Network Commands +CSQ, Signal Strength The following table shows the +CSQ parameters. Table 3-74:+CSQ Parameters +CRLP, Radio Link Protocol The following table shows the +CRLP parameters. Table 3-75: +CRLP Parameters +CREG, Network Registration Status The following table shows the +CREG parameters. Table 3-76:+CREG Parameters Network 3-120 G24-L AT Commands Reference Manual April 15, 2008 +CGREG, GPRS Network Registration The following table shows the +CGREG parameters. Table 3-77:+CGREG Parameters +COPS, Operator Selection Page The following table shows the +COPS parameters. Table 3-78: +COPS Parameters +CPOL, Preferred Operators This command is used to edit the list of preferred network operators located in the SIM card. +MFS, Motorola Frequency of Search Page The following table shows the +MFS parameters. Table 3-80: +MFS Parameters Hardware Information Hardware Information Commands +CBC, Battery Charger Connection +MBC, Battery Charger The following table shows the +MBC parameters. The following table shows the battery levels parameters (as defined in +CBC command. Table 3-82:+MBC Parameters Table 3-83:Battery Level Parameters +CBAUD, Baud Rate Regulation +IPR, Local Terminal/G24-L Serial Port Rate The following table shows the +IPR parameters. +MTDTR, DTR Line Test Command This command checks and outputs the physical current status of theRS232 DTR pin. Table 3-85: +IPR Parameters +MTCTS, CTS Line Test Command &K, RTS/CTS Flow Control &C, Circuit 109 Behavior The following table shows the &C parameters. Note: If &C is set to 2 when a CSD call is set, DCD will always remain OFF. Table 3-88:&C Parameters &D, Circuit 108 Behavior +MCWAKE, GPRS Coverage +MGGIND, GSM/GPRS Service Indicator +CFUN, Shut Down Phone Functionality +ICF, DTE-DCE Character Framing The following table shows the +ICF parameters. Table 3-93:+ICF Parameters ATS97, Antenna Diagnostic The +MRST command enables customer software to perform a hard reset to the G24-L unit. The following table shows the ATS97 parameters. Example +MRST, Perform Hard Reset +MIOC, Motorola I/O Configure Note: Support of the GPIO pins comes instead of supporting the keypad of the Evaluation board. The following table shows the +MIOC parameters. Light control example: Table 3-95:+MIOC Parameters Hardware Information 3-146 G24-L AT Commands Reference Manual April 15, 2008 Data sending (vector example): +MIOD, Motorola I/O Define Note: When using the GPIO lines feature, lines should not be connected directly to ground, a resistor must be used. This is applicable when changing an I/O from input to output. The following table shows the +MIOD parameters. The following table shows the keypad GPIOs. Table 3-96:+MIOD Parameters Table 3-97: Keypad GPIOs +MMAD, Query and Monitor ADC Value Page The following table shows the +MMAD parameters. Table 3-98: +MMAD Parameters Hardware Information 3-152 G24-L AT Commands Reference Manual April 15, 2008 Table 3-98:+MMAD Parameters (Cont.) <Parameter> Description Range/Remark April 15, 2008 G24-L AT Commands Reference Manual 3-153 +MPCMC, Continuous PCM Clock Note: User is advised not to enable sleep mode feature if he wants to use continuous PCM clock feature. Otherwise PCM clock will not work correctly while module is in deep sleep mode. The following table shows the +MPCMC parameters. Table 3-99:+MPCMC Parameters Audio Scope Table3-100 shows the differences between Basic and Advanced audio modes in controlling the audio. Audio Setup Figure 3-2: Audio Modes Table 3-100:Basic and Advanced Audio Modes Comparison Basic Audio Setup Advanced Audio Setup Idle mode General Audio Commands Basic Audio Setup Commands +CRSL, Call Ringer Level Digital Power Up Analog +CLVL, Loudspeaker Volume The following table shows the +CLVL parameters. +CMUT, Mute/Unmute Currently Active Microphone Path The following table shows the +CMUT parameters. Table 3-102:+CLVL Parameters Table 3-103:+CMUT Parameters S94, Sidetone Effect The following table shows the S94 parameters. S96, Echo Canceling Table 3-105:S94 Parameters Table 3-106: ATS96 and ATS94 Behavior Advanced Audio Setup Commands +MAPATH, Audio Path The following diagram shows the audio paths:. Figure 3-6: Audio Paths Input Voice Alert Ring Output Features: Voice Key feedback Alert Ring Input voice The following table shows the +MAPATH parameters. Table 3-108:+MAPATH Parameters Audio 3-166 G24-L AT Commands Reference Manual April 15, 2008 +MAVOL, Volume Setting Input +MAMUT 00 1 00 The following table shows the +MAVOL parameters. Table 3-109: +MAVOL Parameters +MAMUT, Input Devices Mute The following table shows the +MAMUT parameters. Table 3-110:MAMUT Parameters +MAFEAT, Features Selection The following table shows the +MAFEAT parameters. Note: AGC - Automatic Gain Control is an electronic circuit that controls the gain of the received signal in order to ensure adequate performance over a range of input signal levels. Table 3-111:MAFEAT Parameters General Audio Commands +MADIGITAL, Analog/Digital Audio Switching The following table shows the +MADIGITAL parameters. Table 3-112:+MADIGITAL Parameters +CALM, Alert Sound Mode The following table shows the +CALM parameters. Note: Selecting the ring mode with this command retrieves the current alert volume level setting. Table 3-113:+CALM Parameters + MMICG, Microphone Gain V alue The following table shows the +MMICG parameters. Table 3-114:+MMICG Parameters +CRTT, Ring Type Selection The following table shows the +CRTT parameters. Table 3-115:+CRTT Parameters Table 3-116:Ring Tone Types Available +VTD, Tone Duration +VTS, Command-Specific Tone Duration Access Access Control Commands A/, Repeat Last Command AT, Check AT Communication +CPIN, Enter PIN for Unlocking SIM Card or Enter PUK for Unblocking SIM Card Page The following table shows the +CPIN parameters. Table 3-120:+CPIN Parameters Access 3-180 G24-L AT Commands Reference Manual April 15, 2008 +EPIN, Enter SIM PIN2 to Verify PIN2 Indicator +TPIN, Query Number of Remaining SIM PIN/PUK Entering Attempts +CPWD, Change Password The following table shows the +CPWD parameters. Table 3-123: +CPWD Parameters +CLCK, Facility Lock The following table shows the +CLCK parameters. Table 3-124:+CLCK Parameters Table 3-124:+CLCK Parameters (Cont.) +EMPC, Unlocking or Locking Subsidy Code The following table shows the +EMPC parameters. Table 3-125: +EMPC Parameters April 15, 2008 G24-L AT Commands Reference Manual 3-189 Modem Configuration and Profile Modem Register Commands V, G24-L Response Format The following table shows the V parameters. Q, Result Code Suppression Table 3-127:V Parameters The following table shows the Qn parameters. E, Command Echo The following table shows the E parameters. Table 3-128:Qn Parameters Table 3-129:En Parameters X, Result Code Selection and Call Progress Monitoring Control The following table shows the X parameters. Table 3-130:X Parameters S, Bit Map Registers The following table shows the different S-registers and their associated values. Note: S0 (Auto Answer) should work regardless of the DTR HW line state. This is a deviation from the ITU V. 25-ter standard. S2 The following table shows the S2 parameters. Table 3-131:S2 Parameters S12 \S, Show the Status of the Commands and S-registers in Effect \G, Software Control \J, Terminal Auto Rate \N, Link Type +CBAND, Change Radio Band ?, Return the Value of the Last Updated S-register This command displays the most recently updated value stored in an S-register. The following table shows the &F parameters. &F, Set to Factory Defined Configuration Table 3-133: &F Parameters Sleep Mode Commands Sleep Mode AT Commands Sleep Mode HW Signals Page S24, Set Number of Seconds Delay Before G24-L Enters Sleep Mode S102, Set Delay Before Sending Data to the Terminal S100, Set Minimum Time for Terminal to Fall into Sleep Mode +MSCTS, Enable/Disable CTS During Wakeup Period Table 3-137:Command parameters Error Handling Commands +CMEE, Report Mobile Equipment Error The following table shows the +CMEE parameters. Table 3-139: +CMEE Parameters Table 3-140:+CME Errors Page Table 3-141:+CMS Errors Table 3-142:+STK Errors Table 3-141:+CMS Errors (Cont.) Page +CEER, Extended Error Report The following table shows the +CEER parameters. Table 3-143: +CEER Parameters Table 3-143:+CEER Parameters (Cont.) UI (User Interface) +CRSM, Restricted SIM Access Page Page Page Page &V, View Configuration &W, Store User Profile The following table shows the &W parameters. The parameters that are set in a profile are described in the table below. Table 3-145:&W Parameters Table 3-146:Profile Parameters Table 3-146:Profile Parameters (Cont.) &Y, Default User Profile The following table shows the &Y parameters. Table 3-147:&Y Parameters +CMER, Mobile Equipment Event Reporting The following table shows the +CMER parameters. +CLAN, ME Language This command handles the selection of language in the ME. Table 3-148:+CMER Parameters The following table shows the +CLAN parameters. Table 3-149:+CLAN Parameters +CIND, Indicator Control This command is used to query the status of various ME indicators. The following table shows the +CIND parameters. Table 3-150:+CIND Parameters UI (User Interface) 3-228 G24-L AT Commands Reference Manual April 15, 2008 Unsolicited UI Status Messages +CIEV, Indicator Event Reporting GPRS GPRS Functionality GPRS Commands +CGCLASS, GPRS Mobile Station Class +CGDCONT, Define PDP Context This command specifies the PDP (Packet Data Protocol) context. The following table shows the +CGDCONT parameters. Note: The IP address may be entered without double quotes (" "). For example: Table 3-153:+CGDCONT Parameters +CGQMIN, Quality of Service Profile (Min Acceptable) The following table shows the +CGQMIN parameters. Table 3-154: +CGQMIN Parameters +CGQREQ, Quality of Service Profile (Requested) +CGATT, GPRS Attach or Detach Note: This command has the characteristics of both the V.25ter action and parameter +CGPADDR, Show PDP Address The execution command returns a list of PDP addresses for the specified context identifiers. Table 3-156: +CGATT Parameters The test command returns a list of defined <cid>s. The following table shows the +CGPADDR parameters. Table 3-157:+ CGADDR Parameters +MGEER, GPRS Extended Error Report This command is used to return the PDP context activation reject cause. The following table shows the +MGEER parameters. Table 3-158: +MGEER Parameters D*99, Request GPRS Service "D" The following table shows the D*99 parameters. Table 3-159:D*99 Parameters +CGPRS, GPRS Coverage This command indicates whether there is GPRS coverage. Note: GPRS coverage will be detected only when SIM has GPRS ability. The following table shows the +CGPRS parameters. Table 3-160:+CGPRS Parameters +CGACT, PDP Context Activate or Deactivate This command activates/deactivates the specified PDP context(s). The following table shows the +CGACT parameters. Table 3-161:+CGACT Parameters STK Activation Customer Application G24-L AT+M TKE +MTKP AT+M TKP STK Mechanisms +MTKR, Profile Download Profile Structure Table 3-165:Profile Structure Byte 2 (Other) Table 3-166:Profile Structure Byte 3 (Proactive SIM) Table 3-164:Profile Structure Byte 1 (Download) (Cont.) Table 3-167:Profile Structure Byte 4 (Proactive SIM) Table 3-168:Profile Structure Byte 5 (Event driven information) Table 3-169:Profile Structure Byte 6 (Event driven information extensions) Table 3-170:Profile Structure Byte 7 (Multiple card proactive commands) Table 3-171: Profile Structure Byte 8 (Proactive SIM) Table 3-169:Profile Structure Byte 6 (Event driven information extensions) Table 3-172:Profile Structure Byte 9 (Proactive SIM) Table 3-173:Profile Structure Byte 10 (Soft keys support) Table 3-174:Profile Structure Byte 11 (Soft keys information) Table 3-176:Profile Structure Byte 13 (Bearer independent protocol supported bearers class "e") Table 3-177:Profile Structure Byte 14 (Screen height) Table 3-178:Profile Structure Byte 15 (Screen width) Table 3-179:Profile Structure Byte 16 (Screen effects) Note: The bits comprising each subsequent byte are all: RFU, bit = 0. Table 3-181: Profile Structure Byte 18 (Reserved) Table 3-182: Profile Structure Byte 19 (Reserved for TIA/EIA-136 facilities) +MTKE, Motorola ToolKit Enable This command enables/disables the SIM ToolKit functionality. The following table shows the +MTKE parameters. Table 3-183:+MTKE Param eters +MTKP, Motorola ToolKit Proactive (Unsolicited Indication) Note: The Cmd Type numbers refer to the proactive command which was sent from the SIM Table 3-184:+MTKP Field Descriptions Page Table 3-185:+MTKP Parameters of MTKP Field Description (Cont.) Page The following table shows the +MTKP Set parameters. Note: If the SIM asks for yes/no answer then respond with 0 or 1. Table 3-186: +MTKP Set Command Parameters Send DTMF Launch Browser Set Up Event List The following table describes the events types. Table 3-188:Current Event Types Page Language Codes Page Page Page +MTKM, Motorola ToolKit Menu The following table shows the +MTKM parameters. Table 3-191:+MTKM Parameters +MTKM, Motorola ToolKit Menu (Response) The following table shows the +MTKM unsolicited identification parameters. Note: The following example is provider-specific, and is meant to demonstrate menu use via STK. Table 3-192:+MTKM Unsolicited Identification Parameters +MTKC, Motorola ToolKit Call Control The following table shows the +MTKC parameters. +MTKA, Motorola Toolkit Acknowledge Table 3-193: +MTKC Parameters Page TCP/IP +MIPCALL, Create a Wireless Link +MIPOPEN, Open a Socket (UDP or TCP) The following table shows the +MIPOPEN parameters. Note: Motorola does not recommend using port numbers below 1024. These numbers are defined to be reserved for operating systems. Table 3-196:+MIPOPEN Parameters +MIPODM, Open a Socket (UDP or TCP) in Online Data Mode Page The following table shows the +MIPODM parameters. Note: Motorola does not recommend using port numbers below 1024. These numbers are defined to be reserved for operating systems. Table 3-197: +MIPODM Parameters +MIPCLOSE, Close a Socket +MIPSETS, Set Size for Automatic Push +MIPSEND, Send Data +MIPPUSH, Push Data into Protocol Stack +MIPFLUSH, Flush Data from Buffers +MIPRUDP, Receive Data from UDP Protocol Stack +MIPRTCP, Receive Data from TCP Protocol Stack +MIPSTAT, Status Report MIPXOFF, Flow Control - Xoff MIPXON, Flow Control - Xon MIPCONF - Configure Internal TCP/IP stack The following table shows the +MIPCONF parameters. Table 3-206:+MIPCONF Parameters Table 3-206:+MIPCONF Parameters +MPING, Start Ping Execution (ICMP Protocol) The following table shows the +MPING command parameters. Table 3-207: +MPING Command Parameters Table 3-207:+MPING Command Parameters (Cont.) Page +MPINGSTAT, Status Update for +MPING Execution Page GPRS 3-298 G24-L AT Commands Reference Manual April 15, 2008 +MSDNS, Set DNS IP Address The following table shows the +MSDNS parameters. Table 3-210:+MSDNS Parameters GPRS 3-300 G24-L AT Commands Reference Manual April 15, 2008 +MIPCFF, Control Filtering Feature for Incoming TCP Connection The following table shows the +MIPCFF parameters. Table 3-211:+MIPCFF Para me te rs Page NOP - Compatible IGNORED (Compatible Only) Commands Chapter 4: Using the Commands Setting Up the G24-L (Power On and Initial Actions) Figure 4-2: Detailed Phone State Transactions Ready GPRS VoiceCSD Data Recommended G24-L Initialization after Powerup RS232 Lines Setup Test G24-L Communication Basic Configuration Basic Commands (Optional) Configure the RS232 Connection (Optional) Enable Extended Error Messages (Optional) 1. Baud setting example: 2. RS232 HW lines configuration: &C(DCD), &D(DTR), &K(flow-control). 3. Modem IDs (optional): +CGMI,+CGMM,+CGMR,+CGSN 4. Error messages (optional): +CMEE, +CEER SIM Card Status Recommended G24-L Initialization after Powerup 4-8 G24-L AT Commands Reference Manual April 15, 2008 G24-L Network Connection In this step, the G24-L detects existing networks (the user must register to a specific network). Figure 4-8: G24-L Network Connection 1. Registration and call indications example: +CREG, +CLCC 2. Get available networks example: +COPS 3. Get registration messages example: +CREG Terminal Synchronization 4-10 G24-L AT Commands Reference Manual April 15, 2008 SMS Managing Stored Messages in the G24-L Memory April 15, 2008 G24-L AT Commands Reference Manual 4-11 Setting the Notification Indication for Incoming Messages (Using AT+CNMI) Another Possible Option for Setting the CNMI Notification Indication Setting TEXT Mode Parameters (Using AT+CMGW and AT+CMG S) 4-12 G24-L AT Commands Reference Manual April 15, 2008 Writing, Saving and Sending Messages (Using AT+CMGW and AT+CMSS) April 15, 2008 G24-L AT Commands Reference Manual 4-13 Sending Messages (Using AT+CMGS) Deleting Messages (Using AT+CMGD) Call Control 4-14 G24-L AT Commands Reference Manual April 15, 2008 Call Control Figure 4-10: Call States Dialing Using ATD April 15, 2008 G24-L AT Commands Reference Manual 4-15 Direct Dialing from Phone Book This example uses a phone book with these pre-saved items. Call Control 4-16 G24-L AT Commands Reference Manual April 15, 2008 Dialing the Last Number Example Voice Call Manipulations Call Waiting Call Forwarding April 15, 2008 G24-L AT Commands Reference Manual 4-17 Conference Call Data Call 4-18 G24-L AT Commands Reference Manual April 15, 2008 Data Call Switching Modes (Data Mode/Command Mode) GPRS Establishing GPRS PDP Context Activating a Saved Profile in G24-L Two Ways to Activate PDP Context Using the GPRS Wizard Application Using the ATD* Command Set April 15, 2008 G24-L AT Commands Reference Manual 4-21 Changing the Character Set The following is an ASCII translation of the SM contents: Sleep Mode G 2 4-L G24-L DTE TXD STK Page Page Set Up Call Call Control Send DTMF Launch Browser Page April 15, 2008 G24-L AT Commands Reference Manual 4-29 TCP/IP TCP Data Transfer Example Note: This step can be repeated several times until the buffer is full or until the amount of data reaches 340 bytes and data pushed into the stack. Multi-point Data Transfer Example Xoff and Xon Example From this point on, the terminal is not allowed to send data until it receives the +MIPXON command. April 15, 2008 G24-L AT Commands Reference Manual 4-31 Error in Reopening a Valid Socket Audio 4-32 G24-L AT Commands Reference Manual April 15, 2008 Audio Scenarios for Setting Up Handset Mode or Handsfree Mode Handset Mode Handsfree Mode Figure 4-24: Handset or Handsfree Setup Page Page Appendix A: Reference Tables AT Commands Alphabetical Summary Page Page Page Page Page +CMUT Page 3-160 +CMT Page 3-61 Page 3-86 +CMTI Page Page Page Page Page Page Page Page Page Character Set Table CS1: (GSM -> UCS-2) The following table shows the conversion between the GSM and UCS-2 character sets. Page 3-193 Page 3-304 Table A-1: AT Commands (Alphabetical) (Cont.) AT Command Description Page Page Page Page Character Set Table CS2: (ASCII <-> UTF-8) The following table shows the conversion between the ASCII and UTF-8 character sets. Character Set Table CS3: (UCS-2 <-> UTF-8) The following table shows the conversion between the UCS-2 and UTF-8 character sets. Conversions of the characters listed below the table are not supplied. Character Set Table CS7: (ASCII table) The following table shows the conversion for the ASCII character set. Page Page Page Page Acronyms and Abbreviations A B C D G F E H I L M O P Q, R S T U V Index Numerics A Page B C D E F G H I N O P Q R T U V W