PIONEERPOS G24-LC manual +Cband, +Mscts, +Cmee, +Ceer, +Crsm

AT Commands Summary

Table 1-1: AT Commands (Cont.)

AT Command	Description	Page
E	This command defines whether the G24-L echoes the characters	Page 3-192
	received from the user, (whether input characters are echoed to
	output).
X	This command defines the data adaptor response set, and the	Page 3-193
	CONNECT result code format.
Sn	This command reads/writes values of the S-registers, and includes	Page 3-194
	registers 1-49, 94, 96 (Audio) and 102 (Sleep mode).
\S	This command displays the status of selected commands and	Page 3-197
	S-registers.
\G	This command sets the use of the software flow control.	Page 3-197
\J	This command adjusts the terminal auto rate.	Page 3-197
\N	This command displays the type of link.	Page 3-197
+CBAND	This command is supported for backward compatibility only, and	Page 3-197
	has no effect.
?	This command displays the most recently updated value stored in	Page 3-198
	the S-register.
&F	This command restores the factory default configuration profile.	Page 3-198
Z	This command resets the default configuration.	Page 3-199
Sleep Mode Commands
S24	This S-parameter activates/disables the Sleep mode. If the parameter	Page 3-202
	value is greater than 0, it represent the number of seconds till the
	G24-L enters sleep mode.
S102	This S-register sets the value of the delay before sending the data to	Page 3-203
	the terminal.
+MSCTS	This command defines the behavior of the CTS line when the G24-L	Page 3-205
	is in Sleep mode.
Error Handling Commands
+CMEE	This command enables/disables the use of result code +CME	Page 3-206
	ERROR: <err> as an indication of an error relating to the
	functionality of the G24-L.
+CEER	This command returns an extended error report containing one or	Page 3-213
	more lines of information text, determined by the manufacturer,
	providing the reasons for the
	call-clearing errors.
User Interface
+CRSM	This command provides limited access to the Elementary Files on	Page 3-216
	the SIM.
&V	This command displays the current active configuration and stored	Page 3-221
	user profiles.
&W	This command stores the user profile.	Page 3-222

1-22 G24-L AT Commands Reference Manual April 15, 2008