PIONEERPOS G24-LC +MIPFLUSH, Flush Data from Buffers, 201 +MIPPUSH Parameters, Destination IP

GPRS

The following table shows the +MIPPUSH parameters.

	Table 3-201: +MIPPUSH Parameters
<Parameter>	Description
Socket ID	1,2,3,4Number of valid socket
Destination IP	IP of destination site in the format AAA.BBB.CCC.DDD. The value can be written in
	1, 2 or 3 digits.
Destination	0-65535Port of destination site. Written in decimal digits.
Port
Example
AT+MIPPUSH=1	//Terminal asks the G24-L to flush the buffer in socket 1 (was opened

using the +MIPOPEN command) +MIPPUSH: 0

OK

+MIPFLUSH, Flush Data from Buffers

This command causes the G24-L to flush (delete) data accumulated in its accumulating buffers.

Command Type	Syntax	Response/Action
Set	+MIPFLUSH = <Socket ID>	ERROR
		or:
		+MIPFLUSH: <Socket ID>
		OK
Read	+MIPFLUSH?	+MIPFLUSH:[<socket ID>]
Test	+MIPFLUSH=?	+MIPFLUSH=(<Socket ID>)

The following table shows the +MIPFLUSH parameters.

Table 3-202: +MIPFLUSH Parameters

<Parameter>	Description
Socket ID	1,2,3,4 - Number of valid sockets

3-286 G24-L AT Commands Reference Manual April 15, 2008