Lennox Hearth C820S What your headphones can do, Getting started, Inserting the battery, Safety

Models: C820S

1 40
Download 40 pages 23.21 Kb
Page 5
Image 5
3. What your headphones can do

GB

F

ES PT

DE

IT

NL SU NO SE DK

GR

3. What your headphones can do

Your Jabra headphones let you do all this:

Listen to music with or without the noise cancellation feature

Enjoy a quiet environment thanks to the noise cancellation feature

How does Active Noise Cancellation work?

Active Noise Cancelling headphones are comprised of three parts: the microphone, which measures the ambient noise, the speaker, and between the two, the noise cancellation electronics which measures noise and generates the ‘anti-noise’ response.

Anti-noise is an inverted copy of the noise itself. When anti-noise is combined with the original sound disturbance it results in a lower level of noise perceived by our ears.

Specifications

 

 

• Frequency response: 20 Hz to 22 kHz

• Weight: less than 200 grams

Impedance: 64 Ohm

Power: 1 x AAA battery

• Noise Cancellation: up to 22dB

Battery life: up to 50 hours

Dimensions: 174 x 163 x 80 mm

 

 

4. Getting started

The Jabra C820s is easy to operate with only one switch on the earcup to control the Active Noise Cancellation.

5. Inserting the battery

The battery door is located on top of the left ear cup. See fig 2.

1.Open the battery door by pulling it up

2.Insert the AAA battery (positive end facing out)

3.Close the battery door

Note: The battery needs to be changed when the blue LED flashes.

Caution, always use AAA non-rechargeable batteries. Dispose of used batteries according to the instructions.

6.

Turning on the Active Noise Cancellation

GB

1.

Slide the headphone switch to the On position See fig 3.

F

2.

The blue LED should activate and the volume of low frequency background

 

 

noise should reduce noticeably

ES

 

 

7. Connecting the headphones to your audio source

PT

1.

Connect the straight end of the detachablecable to your headphones.

 

 

See fig 4.

DE

2.

Connect the other end to your audio source

3.Press Play on your audio source

4.

You can enjoy the audio with or without the Active Noise Cancellation

IT

 

feature

 

 

 

NL

8.

Storing your headphones

 

1.

Turn the headphones off

SU

2.Rotate the earcups to fold the headphones flat

3. Place the headphones and accessories in the carry case. See fig 5. NO

 

9. Troubleshooting and FAQ

SE

The noise cancellation is absent

 

Make sure the switch is in the correct position (the blue light indicator (LED)

DK

 

should be on)

 

Make sure the battery is inserted correctly and is charged

GR

The audio volume is low or non existent

Make sure the audio cable is plugged in correctly

Check the audio volume of your audio source

There is a crackling noise or a loss of noise cancellation

• Change the battery

10. Need more help?

See the inside cover for your country’s support details.

11.Safety

Read these instructions carefully

Do not expose the headset or any of its supplied parts to rain or other liquids.

Always store the Jabra C820s with power off and safely protected.

Do not use the headphones near water

Avoid storage at extreme temperatures (above 65°C/149°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.

Clean only with a dry cloth

12

RELEASE YOUR JABRA

Jabra C820s stereo headphones

13

 

 

Page 5
Image 5
Lennox Hearth C820S What your headphones can do, Getting started, Inserting the battery, Storing your headphones, Safety