PIONEERPOS G24-LC manual +CLCK, Facility Lock, At+Cpwd =?, Ok At+Cpwd?

Access

Example

AT+CPWD =?

+CPWD: ("SC",8),("AO",4),("OI",4),("OX",4),("AI",4),("IR",4),("AB",4),("AG",4), ("AC",4),("P2",8)

OK AT+CPWD?

+CME ERROR: operation not supported

AT+CLCK: "sc",1,"current pin password" AT+CPWD="sc","incorrect old password","new password" +CME ERROR: incorrect password AT+CLCK="sc",2

+CLCK: 0

OK

AT+CPWD="sc","old password","new password" +CME ERROR: operation not allowed AT+CLCK="fd",1,"current pin2 password" AT+CPWD="p2","old password","new password"

OK AT+CLCK="ai",2 +CLCK: 0,1 +CLCK: 0,2 +CLCK: 0,4

OK

AT+CLCK="ai",1,"correct password"

OK AT+CLCK="ai",2 +CLCK: 1,1 +CLCK: 1,2 +CLCK: 1,4

OK

AT+CPWD="ai","old password","new password"

OK

+CLCK, Facility Lock

This command locks, unlocks or interrogates a G24-L or a network facility <fac> (any kind of call barring program). A password is mandatory for performing locking and unlocking actions, but not for querying. The features of the G24-L that are affected by this are the keypad power-up operation and fixed dialing list. When querying the status of a single call barring program <mode>=2, the <status> for each call type will be returned.

For <fac>="SC", SIM Card PIN setting and for <fac>="FD", SIM Fixed Dialing memory setting, (For more information about <class>, refer to Table 3-124showing the +CLCK parameters).

The <passwd> for "SC" is SIM PIN, and for "FD" it is SIM PIN2.

Note: Concerning <fac>="FD". When FD is enabled it is possible to make a call only to numbers that are located in the FD phone book, include GPRS session (#99*). If the number is not in the phone book the user will receive "operation not allowed". In order to insert a new number to the FD phone book, the user must disable the FD feature first <mode>=0 , insert the new number and only than enable the FD feature <mode>=1.

3-184 G24-L AT Commands Reference Manual April 15, 2008