PIONEERPOS G24-LC manual Current Event Types, +Mtkp=?

GPRS

The following table describes the events types.

	Table 3-188: Current Event Types
Event			Notes
MT Call Event		Performed by G24; no indication sent to the TE.
Call Connected Event		Performed by G24; no indication sent to the TE.
Call Disconnected Event		Performed by G24; no indication sent to the TE.
Location Status Event		Performed by G24; no indication sent to the TE.
User Activity Event		Initiated by TE and reported via +MTKP command. TE is
		responsible for deciding what triggers this event. Only the event
		occurrence is monitored by G24; no additional information is
		required.
Idle Screen Available Event		Initiated by TE and reported via +MTKP command. TE is
		responsible for deciding what triggers this event. Only the event
		occurrence is monitored by G24; no additional information is
		required.
Card Reader Status Event		Issued by message handler of SCIM_CARD_DETECT_IND_ID
		message. Performed by G24; no indication sent to the TE.
Language Selection Event		TE is responsible for deciding what triggers this event. +MTKP
		command contains a data portion with language code – a pair of
		alphanumeric characters (defined in ISO 639 [29]), each of which is
		coded on one byte using the SMS default 7-bit coded alphabet, as
		defined in TS 23.038, with bit 8 set to 0.
Browser Termination Event		Initiated by TE and reported via +MTKP command. The command
		contains a data portion that includes the cause of termination:
		0	User terminated
		1	Error terminated
		TE is responsible for deciding what triggers this event.
Data Available Event		Performed by G24; no indication sent to the TE.
Channel Status Event		Performed by G24; no indication sent to the TE.
Command Type	Syntax		Response/Action	Remarks
Set	+MTKP=16,<result		OK	The Set command
	>[,<Data>]		or:	defines the event type.
			+CME ERROR: <err>
Test	+MTKP=?		OK

3-266 G24-L AT Commands Reference Manual April 15, 2008