Panasonic EP1060 manual Grounding Instructions, How To Move The Chair, Danger

Figure A

GROUNDING INSTRUCTIONS

•The product must be grounded. If it should malfunction, grounding provides the path of least resistance for electric current to reduce the risk of electric shock.

•This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

•Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product even if it does not fit the outlet. Have a proper outlet installed by a qualified electrician.

•This product is for use on a nominal 120-volt circuit and has

a grounding plug that looks like the plug shown in Figure A. Make sure that the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.

GROUNDED

OUTLET

GROUNDING

PIN

HOW TO MOVE THE CHAIR

CAUTION

Do not move the chair while someone is sitting in it.

Failure to observe this point may cause the chair to tip over, possibly resulting in personal injury.

Use the casters to move the chair.

•Do not attempt to move the chair by lifting from the front (right illustration). The correct way to move the chair is by putting your foot on the caster and pushing down from behind the chair (left illustration).

•It is easier to move the chair if the massage heads have been moved to their resting positions and the backrest reclined.

•Moving the chair may damage easily marked floor surfaces, therefore, place a mat or cloth on the floor and move the chair slowly.

•Before pushing down the chair, prepare yourself for its weight and exercise caution when moving it.

	Caster
CORRECT	WRONG

6