•When the Shoulder Position Indicator is flashing, adjust the position of the massage heads (upper roller) so that they lightly touch the shoulder.
•The shoulder position can be adjusted up and down 4in. (10cm).
•When it is not possible to correctly adjust the shoulder position, slide your body down and try adjusting it again.
Too high
Correct position
• Lightly touching the shoulder.
Too low
4.Selecting an Area for Concentrated Massage
• Please see Page
Massaging the Neck and Shoulders | Massaging the Lower Back |
| ||||
• Press this button to focus the program on the neck | • Press this button to focus the program on the lower | |||||
and shoulders. |
|
| back. |
|
| |
(The upper and lower | neck, shoulder | lower back | (The neck and | neck, shoulder | lower back | |
back will also be | shoulders will also be | |||||
|
|
|
| |||
massaged slightly.) |
|
| massaged slightly.) |
|
| |
• Press the button |
|
| • Press the button |
|
| |
again to toggle off. |
| Press | again to toggle off. |
| Press | |
5. Removing Vibration and Tapping from Programs
Removing Vibration from Programmed Operation
•Press this button to remove vibration in programmed operation. (The vibration will change to a kneading massage.)
* Press the button | vibration on/off | tap on/off |
again to restore |
|
|
vibration to the |
|
|
program. |
| Press |
|
|
Removing Tapping from Programmed Operation
•Press this button to remove tapping in programmed operation. (The tapping will change to a kneading massage.)
* Press the button | vibration on/off | tap on/off |
again to restore |
|
|
tapping to the |
|
|
program. |
| Press |
|
|
•For Tapping B, and Vibration, unless the massage heads are actually touching the body then you may not feel anything.
6. Adjusting Massage Intensity
Increasing massage intensity Decreasing massage intensity
•Massage intensity can be adjusted up to 3 levels.
•When the massage heads reach their limit you will hear a “peep, peep, peep” sound.
intensityintensity
Press | Press |
|
7. Auto Stop in Programmed Operation
When the selected program has been completed, the unit will automatically come to a stop.
(Although programmed operation lasts for approximately 15 minutes
•The massage heads will move to the retracted position and stop.
•The ON/OFF lamp will flash until the heads have stopped moving.
•If you want to start another massage, please press 
button.
•Please rest at least 10 minutes between massages.
8.Stopping Programmed Operation
Press 
button to stop programmed operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
9.Stopping the Massage Immediately
Press 
button to stop programmed operation immediately.
•All movement will stop immediately.
•The massage heads will not return to the retracted position, which may make sitting in the seat somewhat uncomfortable.
•Please press 
button twice in order to return the massage heads to the retracted position.
15
