Panasonic EP1060 manual Cleaning And Maintenance, Pillow, Back Cushion, Seat And Armrest Covers

CLEANING AND MAINTENANCE

PILLOW, BACK CUSHION, SEAT AND ARMREST COVERS

•Rub the covers lightly using a soft and dry cloth for normal cleaning.

(Please do not use a cloth containing any kind of chemicals.)

•If the covers becomes dirty, apply a 3–5% solution of a mild detergent in warm water using a soft cloth, tapping the surface to remove it. Afterwards, thoroughly rinse the cloth and use it to remove the detergent, wipe it gently with a dry cloth, and then leave it to dry naturally.

(Please do not use a hair dryer in an attempt to dry the covers more quickly.)

•If the covers is allowed to come into contact with vinyl for an extended period of time, this may cause it to become discolored.

Water

Mild

Detergent

PIPES AND PLASTIC AREAS

z Wipe the unit with a cloth that has been
soaked in a mild detergent and then
thoroughly wrung out.	Mild
	Detergent

xNext wipe the unit with a cloth that has been

dampened with just water.
* Make sure you thoroughly wring out the
cloth first when cleaning the controller.	Water

cAllow the unit to dry naturally.

• Never use benzene, thinners or alcohol.

Thinners Benzene Alcohol

SEAT FABRIC

zWipe the seat fabric with a cloth that has been soaked in a weak mild detergent solution and then thoroughly wrung out.

xUse a weak mild detergent to brush on to areas where the seat fabric has become particularly soiled. Be careful not

to brush the fabric too much as this may cause damage.

c Next wipe the fabric with a cloth that has been dampened with just water.

v Allow the fabric to dry naturally.

CAUTION

Water

•Always remove the power plug from the power socket when cleaning the unit. Take care to dry your hands thoroughly before attempting to plug the power plug back into the power socket when you have finished. Failure to do so may lead to electric shock or burns.

25