PIONEERPOS G24-LC manual Result Code Suppression, V Parameters, Parameter Description Value

Chapter 3: AT Commands Reference

The following table shows the V parameters.

		Table 3-127: V Parameters
<Parameter>		Description
<value>	0	Transmits limited headers and trailers, and numeric text.
	1	Transmits full headers and trailers, and verbose response text.
	The default value is 1.

Example

ATV?

V:1 OK ATV0 0 ATV7 4 ATV1

OK ATV7

ERROR

Q, Result Code Suppression

This command determines whether to output the result codes. Information text transmitted in response to commands is not affected by the setting of this parameter.

Command Type	Syntax	Response/Action	Remarks
Set	ATQ<value>	OK	The set commands sets whether or not
		or:	to output result codes.
		+CME ERROR: <err>
Read	ATQ?	<current value>	The Read command reads the current
			setting for result code suppression.
Test			The Test command for Q is not
			defined, and therefore is not supported
			by the G24-L. The G24-L returns an
			error.

April 15, 2008 G24-L AT Commands Reference Manual 3-191