PIONEERPOS G24-LC manual +Mcsn?, +Mcsn=?

Phone Books and Clock

•<mode> = 0 - Do not show any number on next +CPIN insertion command

•<mode> = 1 - Default <index> (equals 1) is set to <mode> = 1

If only a pair of <mode> and <index> values are given, then the Set command is interpreted as follows:

•<mode> = 0, <index> = any valid indexSet mode for given index to 0

•<mode> = 1, <index> = any valid indexSet mode for given index to 1

If only <mode>, <index> and <number> values are given, then the Set command is interpreted as follows:

•Store in <index> of EFmsisdn in the SIM, the <number>. Since no <alpha> was given, corresponding <alpha> will be identical to the <alpha> already stored in this <index>. Also store the <mode> value for this <index>.

If all parameters are given, then the Set command is interpreted as follows:

•Store in <index> of EFmsisdn in the SIM, the <number> and corresponding <alpha>. In case an empty string was given as the <alpha> parameter, the corresponding <alpha> will be an empty string. Also store the <mode> value for this <index>.

Note: Only the last <index> whose mode was set to 1 will be sent to the DTE.

Command Type	Syntax	Response/Action	Remarks
Set	+MCSN=<mode>	OK	See above
	[,<index>[,<numb	or:
	er>[,<alpha>]]]	+CME ERROR: <err>
Read	+MCSN?	+MCSN: <index>	The Read command queries the current
		OK	settings for the <index> of the storage
		or:	place in which the <mode> is equal to
			1. If no index has its <mode> set to 1,
		+CME ERROR: <err>
			then the response <index> will be
			equal to 0.
Test	+MCSN=?	+MCSN: (list of	The Test command returns the possible
		supported	<mode> and <index> values.
		<mode>s),(list of
		supported <index>es)
		OK
		or:
		+CME ERROR: <err>

3-70 G24-L AT Commands Reference Manual April 15, 2008