PIONEERPOS G24-LC manual 34 +CPBR Parameters

Phone Books and Clock

requested, all entries that contain data within that range are returned. If a listing fails in a G24-L error, +CME ERROR: <err> is returned.

This command can also be used to obtain information about the number of entries and the maximum size of a phone number and alpha tag fields in the phone book.

This command acts on the currently active phone book, as selected with the +CPBS command (Refer to “+CPBS, Select Phone Book Memory”, page 3-60).

Command	Syntax	Response/Action	Remarks
Type
Set	+CPBR=<index1>	[+CPBR:	The Set command returns
	[,<index2>]	<index1>,<number>,<type>,<text>	phone book entries.
		[<CR><LF>
		+CPBR:
		<index2>,<number>,<type>,<text>]]
		OK
		or:
		+CME ERROR: <err>
Test	+CPBR=?	+CPBR: (list of supported	The Test command
		<index>s),[<nlength>], [<tlength>]	returns the entry range
		OK	supported by the current
			storage as a compound
			value and the maximum
			lengths of the <number>
			and <text> fields.

The following table shows the +CPBR parameters.

	Table 3-34: +CPBR Parameters
<Parameter>	Description
<index1>	Index for a given phone book entry
<index2>
<number>	Phone number of a given entry
<type>	The address type of a phone number
	129 Use for local call
	145 Use “+” for international access code
	128 Unknown
	"128" is used to represent an email address or a mailing list. In this case, <ph_type>
	can be used to further differentiate between the two.
<text>	Text identifier for a phone book entry, according to the character set as specified by
	command +CSCS.
<nlength>	The maximum number of digits in the <number>.
<tlength>	The maximum number of characters in the <text> entry

3-62 G24-L AT Commands Reference Manual April 15, 2008