PIONEERPOS G24-LC manual +Cpms

AT Commands Alphabetical Summary

Table A-1: AT Commands (Alphabetical) (Cont.)

AT Command	Description	Page
+CPBS	This command selects the	Page 3-60
	memory that is to be used for
	reading and writing entries in
	G24s that contain more than one
	phone book memory.
+CPBW	This command enables the user	Page 3-64
	to store a new entry in the phone
	book, or delete an existing entry
	from the phone book.
+CPIN	This command is only relevant	Page 3-177
	for phones that use SIM cards. It
	unlocks the SIM card when the
	proper SIM PIN is provided, and
	unblocks the SIM card when the
	proper SIM PUK is provided.
+CPMS	This command handles the	Page 3-76
	selection of the preferred storage
	area for messages.
+CPOL	This command is used to edit the	Page 3-125
	list of preferred operators located
	in the SIM card.
+CPUC	This command sets the	Page 3-48
	parameters of the Advice of
	Charge-related price per unit and
	currency table found in the SIM
	file, EFPUCT.
+CPWD	This command sets a new	Page 3-183
	password for the facility lock.
+CR	This command controls whether	Page 3-49
	or not the extended format of an
	outgoing call is displayed or not.
+CRC	This command controls whether	Page 3-17
	to present the extended format of
	the incoming call indication.
+CREG	This command enables/disables	Page 3-119
	the network status registration
	unsolicited result code.
+CRING	This unsolicited event indicates	Page 3-17
	the type of incoming call.
+CRLP	This command returns the Radio	Page 3-118
	Link Protocol parameters.
+CRSL	This command handles the	Page 3-158
	selection of the incoming call
	ringer and alert tone (SMS)
	sound level on the alert speaker
	of the G24-L.

A-8 G24-L AT Commands Reference Manual April 15, 2008