PIONEERPOS G24-LC 125 +EMPC Parameters, Access Command Type Syntax Response/Action Remarks Set

Access

Command
Type	Syntax	Response/Action	Remarks
Set	+EMPC=<pin>,<action>	+EMPC:<unlock>,<reset>	The Set command checks the
		OK	password with requested action
			type. All parameters are
		or:	mandatory field. If the pin is
			wrong or inserts wrong action, no
			action is taken towards the G24-L,
		+CME ERROR: <err>	and an error message, +CME
			ERROR, is returned to the
			terminal. The Set command issued
			gives the code corresponding to
			the required action.
Read	+EMPC?	+EMPC:3,<reset>	The read command returns the
		OK	current EMPC reset value only.
		or:
		+CME ERROR <err>

The following table shows the +EMPC parameters.

		Table 3-125: +EMPC Parameters
<Parameter>		Description
<pin>	Subsidy Lock pin code.
<action>	0	Unlock subsidy
	1	Reset subsidy
<unlock>	0	Correct pin code is entered
	1	Wrong pin code is entered
	2	Wait
	3	No meaning
<reset>	0	No subsidy lock
	1	Subsidy lock / Reset not allowed
	2	Subsidy unlock / Reset allowed

3-188 G24-L AT Commands Reference Manual April 15, 2008