PIONEERPOS G24-LC manual 78 +COPS Parameters, Parameter Description Format, Oper

Network

The following table shows the +COPS parameters.

		Table 3-78: +COPS Parameters
<Parameter>		Description
<format>	The operator format type:
	0	Long alphanumeric
	1	Short alphanumeric
	2	Numeric
	The default value is 0.
<mode>	Determines whether what is displayed is defined by <oper>, or is done automatically
	by the G24-L.
	0	Automatic (<oper> field is ignored)
	1	Manual (<oper> field is present)
	2	De-register from network
	3	Set only <format> (<oper> field is ignored); used for Read command only, do
	not attempt registration/deregistration
	4	Manual/automatic (<oper> field is present; if manual selection fails, use
	automatic mode)
	The default value is 0.
<stat>	0	Unknown
	1	Available
	2	Current
	3	Forbidden
<oper>	Operator name displayed.
	The long alphanumeric format can be up to 16 characters long. The short
	alphanumeric format can be up to 8 characters long.
	The numeric format is the GSM Location Area Identification number (refer to GSM
	04.08 [8] subclause 10.5.1.3), consisting of a three BCD digit country code (as per
	ITU-T E.212 Annex A [10]), plus a two BCD digit network code, which is
	administration specific.
	The returned <oper> is not in BCD format, but in IRA characters converted from
	BCD, and therefore the number has the following structure:
	(country code digit 3)(country code digit 2)(country code digit 1)(network code digit
	2)(network code digit 1)

3-124 G24-L AT Commands Reference Manual April 15, 2008