PIONEERPOS G24-LC manual +CMGS, Send SM to Network, 70 +CMGS Parameters

SMS

+CMGS, Send SM to Network

This command sends an SM from the G24-L to the network. The message reference value <mr> is returned to the G24-L upon successful delivery of the message.

Note: The DCD signal will be in ON state while text is entered.

The header parameters in TEXT mode will be set according to CSMP settings.

Command Type	Syntax	Response/Action	Remarks
Set	If text mode (+CMGF=1):	+CMGS: <mr>	The Set command
	+CMGS=<da>[,<toda>]<CR>	+CMS ERROR: <err>	validates the input
	text is entered<ctrl-Z/ESC>		parameters, sends the
			SM to network and
	If PDU mode (+CMGF=0):
			reports the result of
	+CMGS=<length><CR>
			the operation to the
	PDU is entered<ctrl-Z/ESC>		G24-L.

The following table shows the +CMGS parameters.

	Table 3-70: +CMGS Parameters
<Parameter>	Description
<da>	Destination address in quoted string. This field contains a single MIN number.
<toda>	Type of DA. Value between 128-255 (according to GSM 03.40, 9.1.2.5). If this field is
	not given and first character of <da> is '+' , <toda> will be 145, otherwise 129.
<length>	Size of message in PDU mode format, in octets, excluding SMSC data.
<mr>	Sent message reference number.
PDU	Message header and contents in PDU mode format. See description in +CMGW
	section.

Example

AT+CMGS="064593042",129

>This is the message body <CTRL+Z> //<CTRL+Z> ends the prompt text mode and returns to regular AT command mode

OK AT+CMGF=0

OK AT+CMGS=24 >079179521201009511FF0B917962543940F20008001400410042004300440045 <CTRL+Z> +CMGS: 128

OK

Note: Any character sent by TE to G24-L before G24-L has reported a result of AT+CMGS operation, will abort AT+CMGS command execution. However, if SMS was already sent to network and sending operation was successful, the result of operation "+CMGS <mr>" will be reported by G24-L.

A flex dependant enhancement enables the reporting of numeric error code to TE, in case the sending operation has failed. The numeric error code will be reported in format: "+CMGS ERROR: <err>".

3-110 G24-L AT Commands Reference Manual April 15, 2008