PIONEERPOS G24-L 187 +MTKP Parameters Response Code, Parameter Description Result, Additional

Chapter 3: AT Commands Reference

The following table shows the +MTKP parameters for response code 26.

Table 3-187: +MTKP Parameters – Response Code 26

<Parameter>		Description
<result>	0	Success
	1	Failure
<additional	0	No specific cause can be given
info>	1	Bearer unavailable
	2	Browser unavailable
	3	G24-L unable to read provisioning data
	Note: Additional info should be added only in case of failure.
<err>	1	Unknown result value.

Note: When STK proactive commands are disabled by the TE, MTKP unsolicited events are not issued to it. In such a case, the Launch Browser command is rejected with the result value "Browser unavailable".

The diagram below demonstrates the communication during Launch Browser command.

SIM

Launch Browser

ME TE

+MTKP: 26,<URL>,<bearers>, <proxyld>,[alphald>]

AT+MTKP=26,<Result>, [<additional info>]

Launch Browser Response

Figure 3-15: Communication During Launch Browser Command

Set Up Event List

The SIM card uses this command to supply a set of events, which becomes the current list of events for the G24-L to monitor, replacing any existing list. This command can also be used to remove the list of events. The list of events provided by the SIM is erased if the G24-L is powered down, or if the SIM is removed or electrically reset. When one of the events in the current list occurs, the G24-L uses the Event Download mechanism to transfer event details to the SIM.

April 15, 2008 G24-L AT Commands Reference Manual 3-265