PIONEERPOS G24-L AT Commands Alphabetical Summary, Table A-1 AT Commands Alphabetical Description

Appendix A: Reference Tables

This appendix contains the following sections:

•AT Commands Alphabetical Summary, below

•Character Set Table CS1: (GSM -> UCS-2), Page -17

•Character Set Table CS2: (ASCII <-> UTF-8), Page -21

•Character Set Table CS3: (UCS-2 <-> UTF-8), Page -21

•Character Set Table CS6: (UCS-2 Full Table), Page -21

•Character Set Table CS7: (ASCII table), Page -22

Note: Character Set Table CS6: (UCS-2) is provided on CD due to its size.

AT Commands Alphabetical Summary

The following table contains an alphabetical list of all the G24-L AT commands.

Table A-1: AT Commands (Alphabetical)

AT Command	Description	Page
$	This command displays a list of	Page 3-7
	all the AT commands supported
	by the G24-L.
%C	This command is supported for	Page 3-304
	backward compatibility only, and
	has no effect.
&C	This command determines how	Page 3-136
	the state of the DCD line relates
	to the detection of the received
	line signal from the distant end.
&D	This command determines how	Page 3-138
	the G24-L responds when the
	DTR (Data Terminal Ready)
	status is changed from ON to
	OFF during the online data state.
&F	This command restores the	Page 3-198
	factory default configuration
	profile.

April 15, 2008 G24-L AT Commands Reference Manual A-1