PIONEERPOS G24-LC manual +CIND, Indicator Control, 150 +CIND Parameters

Chapter 3: AT Commands Reference

AT+CLAN="DE"

OK AT+CLAN? +CLAN: "DE"

OK

+CIND, Indicator Control

This command is used to query the status of various ME indicators.

Command
Type	Syntax	Response/Action	Remarks
Read	AT+CIND?	+CIND:<ind>,<ind>….	Read command returns the
			status of ME indicators.
Test	AT+CIND=?	+CIND :(<descr>,(list of supported	Test command returns pairs,
		<ind>s)) ,(<descr>,(list of	where string value <descr> is
		supported<ind>s))…	a short description of the indi-
			cator and compound value is
			the allowed values for the
			indicator.

The following table shows the +CIND parameters.

		Table 3-150: +CIND Parameters
<Parameter>		Description
<service>	0	Service not available.
	1	Service available.
<call>	0	No call in progress.
	1	Call in progress.
<recsms>	0	No unread messages.
	1	Unread messages exist.
<roam>	0	ME is camped on a home network.
	1	ME is roaming on home network.
	2	ME is roaming on other network.
<signal>	0	ME has no service.
	1	ME has 1 bar of signal strength.
	2	ME has 2 bars of signal strength.
	3	ME has 3 bars of signal strength.
	4	ME has 4 bars of signal strength.
	5	ME has 5 bars of signal strength.
<simav>	0	No SIM card available.
	1	SIM card is inserted.
<smsfull>	0	SMS storage is not full.
	1	SMS storage is full.

April 15, 2008 G24-L AT Commands Reference Manual 3-227