PIONEERPOS G24-LC +MIPSTAT, Status Report, MIPXOFF, Flow Control Xoff, 204 +MIPRTCP Parameters

GPRS

The following table shows the +MIPRTCP parameters.

	Table 3-204: +MIPRTCP Parameters
<Parameter>	Description
Socket ID	1,2,3,4 - Number of valid sockets.
Left	Size of received Data still left in protocol stack.
Data	Data string received with 0-F hexadecimal digits. String ends with a <CR>.

Example

+MIPRTCP: 3,0,7171

+MIPSTAT, Status Report

This unsolicited event is sent to the terminal indicating a change in status. Currently there are two possible sources of failure, a broken logical connection or a broken physical connection.

Syntax

+MIPSTAT: <socket_ID>,<n>[,<number_of_acknowledged_bytes >]

The following table shows the +MIPSTAT parameters.

Table 3-205: +MIPSTAT Parameters

<Parameter>		Description
<SocketID>	A unique number that identifies a connection.
	Valid socket numbers - 1, 2, 3 and 4
<n>	0	- ACK indication
	1	- Broken protocol stack
<number_of_acknowledged_bytes >	Total number of bytes that were acknowledged

Example

+MIPSTAT: 1,2

MIPXOFF, Flow Control - Xoff

This command is the unsolicited response that the G24-L sends to the terminal to stop sending data when it does not have enough memory to process new +MIPSEND requests. The G24-L uses the accumulating buffer prior to pushing data into the protocol stack. This memory resource is protected by a Xoff_upper watermark.

3-288 G24-L AT Commands Reference Manual April 15, 2008