PIONEERPOS G24-L +CLIP, Calling Line Identification, +CLIP Indication, Ring AT+CRC=1, At+Clip?

	Chapter 3: AT Commands Reference
RING
AT+CRC=1	//Enable extended ring format
OK
+CRING: REL ASYNC
+CRING: REL ASYNC
ath
AT+CRC=1
OK	//Mobile fax call terminated (multi-numbered scheme) from PSTN
fax machine
+CRING: ALT Voice/Fax
NO CARRIER
OK

+CLIP, Calling Line Identification

This command controls the Calling Line Identity (CLI) presentation indication to the terminal when an incoming call is detected by the G24-L.

This command allows the user to query the provisioning status of the CLI by the network and by the G24-L. The command also allows the user to enable/disable the CLI presentation by the G24-L to the terminal.

The +CLIP indication information varies depending on what is provided by the network and what information is stored in the G24-L phone book.

Command	Syntax	Response/Action	Remarks
Type
Set	AT+CLIP=<n>	OK	The Set command enables or disables
		+CME ERROR: <err>	the presentation of the CLI indication
			from the G24-L to the terminal.
			Note: The Set command does not
			address the network.
Read	AT+CLIP?	+CLIP: <n>, <m>	The Read command returns the +CLIP
		OK	enable/disable state in the G24-L as
			well as in the network provisioning
			state of the CLI presentation.
Test			The Test command returns the Set
			command options (0,1).

+CLIP Indication

When the CLI presentation indication is enabled by the G24-L (<n>=1), this unsolicited indication is sent to the terminal after the RING indication.

+CLIP:<number>,<type>[,<subaddr>,<satype>[,[<alpha>][,<CLI validity>]]]

April 15, 2008 G24-L AT Commands Reference Manual 3-19