PIONEERPOS G24-LC manual +Mscts

AT Commands Alphabetical Summary

Table A-1: AT Commands (Alphabetical) (Cont.)

AT Command	Description	Page
+MSCTS	This command defines the	Page 3-205
	behavior of the CTS line when
	the G24-L is in Sleep mode.
+MSDNS	This command sets/reads DNS IP	Page 3-299
	address for each socket.
+MTCTS	This command sets the CTS pin	Page 3-135
	of the RS232 to not active (high),
	waits one second and then returns
	the CTS to active (low).
+MTDTR	This command checks and	Page 3-134
	outputs the physical current
	status of the DTR pin of the
	RS232.
+MTKA	This command sends	Page 3-274
	acknowledge response from the
	user (TE) to the STK.
+MTKC	This unsolicited event notifies the	Page 3-274
	terminal when supplementary
	services, SMS Control or Call
	Control are modified.
+MTKE	This command enables/disables	Page 3-257
	the SIM ToolKit functionalities.
+MTKM	This is both a command and an	Page 3-272
	unsolicited event. The command
	selects items from the menu.
+MTKP	This is both a command and an	Page 3-258
	unsolicited event. The command
	responds to an unsolicited event.
+MTKR	This command displays the	Page 3-247
	profile that is downloaded from
	the G24-L to the SIM during the
	SIM initialization process.
+MTTY	This command is used to	Page 3-57
	enable/disable the TTY (Tele
	Typewriter) support in the G24.
+MVC	This AT command is used to	Page 3-38
	choose and configure the
	priority order of the supported
	voice codecs (vocoders).
+TPIN	This command queries the	Page 3-182
	number of remaining SIM
	PIN/PUK entering attempts.
+VTD	This command handles the	Page 3-175
	selection of tone duration.

A-14 G24-L AT Commands Reference Manual April 15, 2008