PIONEERPOS G24-LC manual Phone Books and Clock, Directory Access Commands

Phone Books and Clock

Phone Books and Clock

Directory Access Commands

This set of commands enables read/write access to the phone book contained within the G24-L, including both the numeric and the alpha information contained in the location. The presentation is according to GSM 07.07.

In some cases, it may be possible to use these commands to access the dialed and received call stacks. However, as these phone books cannot be edited, the +CPBW command does not work on them.

+CPBS, Select Phone Book Memory

This command handles the selection of the memory to be used for reading and writing entries in the G24-L’s phone books’ memory. (When there is a separate storage on the SIM card and in the G24-L’s internal EEPROM).

Command	Syntax	Response/Action	Remarks
Type
Set	AT+CPBS=<storage>	OK	The Set command selects the phone
	[,<pin2>]	or:	book memory storage which is to be
	<pin2> is optional	+CME ERROR: <err>	used by other phone book commands.
	while <storage> =
	"FD" only
Read	+CPBS?	+CPBS:	The Read command returns the
		<storage>[,<used>,<tot	currently selected phone book
		al>]	memory, number of used entries and
			total number of entries in the phone
			book memory.
Test	+CPBS=?	+CPBS: (list of	Test command returns the supported
		supported <storage>s)	storages as a compound value.
		OK

Note: Read format of +CPBS joins RC and MC, therefore the united list will be prompted.

3-60 G24-L AT Commands Reference Manual April 15, 2008