PIONEERPOS G24-LC +Crc, Ring, +Cring, +Clip, +Ccwa, +Chld, +Ccfc, +Clir, +Cbst, +Chup, +Csns

AT Commands Summary

Table 1-1: AT Commands (Cont.)

AT Command	Description	Page
DL	This command places a voice call to the last number dialed.	Page 3-14
H	This command hangs up, or terminates a particular call.	Page 3-15
A	This command answers an incoming call, placing the G24-L into the	Page 3-17
	appropriate mode, as indicated by the RING message.
+CRC	This command controls whether to present the extended format of	Page 3-17
	the incoming call indication.
RING	This unsolicited event is received when an incoming call (voice,	Page 3-17
	data or fax) is indicated by the cellular network.
+CRING	This unsolicited event indicates the type of incoming call.	Page 3-17
+CLIP	This command controls the Calling Line Identity (CLI) presentation	Page 3-19
	to the terminal when there is an incoming call.
+CCWA	This command controls the Call Waiting supplementary service,	Page 3-21
	including settings and querying of the network by the G24-L.
+CHLD	This command controls the Call Hold and Multiparty Conversation	Page 3-23
	supplementary services.
+CCFC	This command controls the call-forwarding supplementary service.	Page 3-27
+CLIR	This command enables/disables the sending of caller ID information	Page 3-29
	to the called party, for an outgoing call.
+CBST	This command handles the selection of the bearer service and the	Page 3-31
	connection element to be used when data calls are originated.
O	This command returns a phone to the Online Data mode and issues a	Page 3-33
	CONNECT or CONNECT <text> result code.
&Q	This command selects the asynchronous mode, and has no effect.	Page 3-33
+CHUP	This command causes the G24-L to hang up the current GSM call.	Page 3-34
+CSNS	This command handles the selection of the bearer or teleservice to	Page 3-34
	be used when a mobile terminated single numbering scheme call is
	established.
+MDC	This command enables you to select the desired messages to be	Page 3-36
	displayed upon connection of a voice call with a remote party.
+CTFR1	This command terminates an incoming call and diverts the caller to	Page 3-37
	the number previously defined in CCFC, or to a voice mail if one
	exists for the subscriber.
+MVC	This AT command is used to choose and configure the	Page 3-38
	priority order of the supported voice codecs (vocoders).
+MTTY	This command is used to enable/disable the TTY (Tele Typewriter)	Page 3-57
	support in the G24-L.
Call Status Messages
+CPAS	This command displays the current activity status of the G24-L, for	Page 3-39
	example, call in progress, or ringing.

1-16 G24-L AT Commands Reference Manual April 15, 2008