PIONEERPOS G24-LC manual +CMUT, Mute/Unmute Currently Active Microphone Path, 102 +CLVL Parameters

Audio

The following table shows the +CLVL parameters.

	Table 3-102: +CLVL Parameters
<Parameter>	Description
<level>	0-7 Manufacturer-specific volume range. 0 is lowest volume (not mute).
	The default value is 7 after flex.

Example

AT+CLVL? +CLVL: 7

OK AT+CLVL=? +CLVL: (0-7)

OK AT+CLVL=3

OK

+CMUT, Mute/Unmute Currently Active Microphone Path

This command is used to mute/unmute the currently active microphone path by overriding the current mute state.

Command Type	Syntax	Response/Action	Remarks
Set	+CMUT=<state>	OK	The Set command enables/disables
		or:	uplink voice muting during a voice
		+CME ERROR: <err>	call.
Read	+CMUT?	+CMUT: <state>	The Read command returns the current
		OK	uplink voice mute/unmute state.
Test	+CMUT=?	+CMUT: (list of	The Test command returns the possible
		supported <state>s)	<state> values.
		OK

The following table shows the +CMUT parameters.

		Table 3-103: +CMUT Parameters
<Parameter>		Description
<n>	0	Unmute microphone path
	1	Mute microphone path

3-160 G24-L AT Commands Reference Manual April 15, 2008