PIONEERPOS G24-LC manual +Mipcff

AT Commands Alphabetical Summary

Table A-1: AT Commands (Alphabetical) (Cont.)

AT Command	Description	Page
+MIPCALL	This command creates a wireless	Page 3-276
	PPP connection with the GGSN,
	and returns a valid dynamic IP
	for the G24-L.
+MIPCFF	This command sets the Filtering	Page 3-301
	List.
+MIPCLOSE	This command causes the G24-L	Page 3-282
	to free the socket accumulating
	buffer and disconnect the G24-L
	from a remote side.
+MIPCONF	Configure Internal TCP/IP stack.	Page 3-289
+MIPFLUSH	This command causes the G24-L	Page 3-286
	to flush (delete) data accumulated
	in its accumulating buffers.
+MIPODM	This command causes the G24-L	Page 3-279
	to initialize a new socket in
	Online Data Mode and open a
	connection with a remote side.
+MIPOPEN	This command causes the G24-L	Page 3-277
	to initialize a new socket and
	open a connection with a remote
	side.
+MIPPUSH	This command causes the G24-L	Page 3-285
	to push the data accumulated in
	its accumulating buffers into the
	protocol stack.
+MIPRTCP	This unsolicited event is sent to	Page 3-287
	the terminal when data is
	received from the TCP protocol
	stack.
+MIPRUDP	This unsolicited event is sent to	Page 3-287
	the terminal when data is
	received from the UDP protocol
	stack.
+MIPSEND	This command causes the G24-L	Page 3-284
	to transmit the data that the
	terminal provides, using an
	existing protocol stack.
+MIPSETS	This command causes the G24-L	Page 3-283
	to set a watermark in the
	accumulating buffer. When the
	watermark is reached, data is
	pushed from the accumulating
	buffer into the protocol stack.

A-12 G24-L AT Commands Reference Manual April 15, 2008