PIONEERPOS G24-LC manual 154 +CGQMIN Parameters

Chapter 3: AT Commands Reference

Command
Type	Syntax	Response/Action	Remarks
Read	AT+CGQMIN?	+CGQMIN: <cid>, <precedence>,	The Read command
		<delay>,	returns the current
		<reliability>,<peak>,	settings for each defined
		<mean>[<CR><LF>+CGQMIN:	context.
		<cid>, <precedence>,<delay>,
		<reliability.>, <peak>, <mean>[...]]
		OK
		or:
		+CME ERROR: <err>
Test	AT+CGQMIN=?	+CGQMIN: <PDP_type>, (list of	The Test command
		supported <precedence>s), (list of	returns the parameter
		supported <delay>s), (list of	value ranges for each
		supported <reliability>s), (list of	<PDP_type>
		supported <peak>s), (list of
		supported <mean>s)
		[<CR><LF>+CGQMIN:
		<PDP_type>, (list of supported
		<precedence>s), (list of supported
		<delay>s), (list of supported
		<reliability>s), (list of supported
		<peak>s), (list of supported
		<mean>s)
		OK
		or:
		+CME ERROR: <err>

The following table shows the +CGQMIN parameters.

	Table 3-154: +CGQMIN Parameters
<Parameter>	Description
<cid>	A numeric parameter that specifies a particular PDP context definition. The value is
	from 1 to 3.
<precedence>	A numeric parameter that specifies the precedence class.
<delay>	A numeric parameter that specifies the delay class.
<reliability>	A numeric parameter that specifies the reliability class.
<peak>	A numeric parameter that specifies the peak throughput class.
<mean>	A numeric parameter that specifies the mean throughput class.

April 15, 2008 G24-L AT Commands Reference Manual 3-235