PIONEERPOS 194 +MTKA Parameters, April 15 G24-L AT Commands Reference Manual 275, AT+MTKA=1

Chapter 3: AT Commands Reference

The following table shows the +MTKA parameters.

		Table 3-194: +MTKA Parameters
<Parameter>		Description
<n>	Action type.
	0	Disable (default).
	1	Enable.

Notes:For <n> = 0 (disable)

All messages should be sent to the TE automatically.

Sending AT+MTKA has not influence.

For <n> = 1 (enable)

The first proactive message "Display Text" (+MTKP:1,…) should be sent to the TE. Until the user send acknowledge (by sending AT+MTKA command), NO other proactive of "Display Text" (+MTKP:1,…) or Menu message (+MTKM:…) should be sent to the TE. Other proactive or unsolicited indications and messages (RING, +CLCC:.., +MTKP:10, …) should be sent automatically to the TE.

Example

AT+MTKA=? +MTKA: (0,1)

OK

AT+MTKA=0// set ACK to disabled

OK AT+MTKA? +MTKA: 0

OK

// Example of receiving messages from STK, and no ACK is required:

…

+MTKP: 1,0,"! YOUR RECHARGE OF TSH: 250.00 TO 0756706666 IS SUCCESSFUL"

+MTKP: 1,0,"Transaction successful!"

+MTKM: "VodaFASTA"

+MTKM: 96,5,Recharge,0

+MTKM: 97,5,Transfer,0

+MTKM: 98,5,Report,0

+MTKM: 99,5,Administration,0

+MTKM: 100,5,Exit,0

…

AT+MTKA=1	// set ACK to enabled
OK
AT+MTKA?
+MTKA: 1
OK
	// Example of receiving messages from STK, and ACK is required:
…

April 15, 2008 G24-L AT Commands Reference Manual 3-275