PIONEERPOS G24-LC manual +CGPADDR, Show PDP Address, 156 +CGATT Parameters

GPRS

Command Type	Syntax	Response/Action	Remarks
Set	AT+CGATT=	OK	The Set command
	[<state>]	or:	attaches/detaches the
		+CME ERROR: <err>	ME to/from the GPRS
			service.
Read	AT+CGATT?	+CGATT: <state>	The Read command
		OK	returns the current
		or:	GPRS service state.
		+CME ERROR: <err>
Test	AT+CGATT=?	+CGATT: (list of supported <state>s)	The Test command
		OK	requests information on
		or:	the supported GPRS
			service states.
		+CME ERROR: <err>

Note: This command has the characteristics of both the V.25ter action and parameter commands. Therefore, it has the Read form in addition to the Execution/Set and Test forms.

The following table shows the +CGATT parameters.

Table 3-156: +CGATT Parameters

<Parameter>		Description
<state>	Indicates the state of the GPRS attachment:
	0	Detached.
	1	Attached.

Example

AT+CGATT=? +CGATT: (0,1)

OK AT+CGATT? +CGATT: 0

OK AT+CGATT=0

OK

+CGPADDR, Show PDP Address

The execution command returns a list of PDP addresses for the specified context identifiers.

3-238 G24-L AT Commands Reference Manual April 15, 2008