PIONEERPOS G24-LC manual 80 +MFS Parameters, Parameter Description Freq

Network

The following table shows the +MFS parameters.

		Table 3-80: +MFS Parameters
<Parameter>		Description
<freq>	This value defines the frequency of search.
	0	Continuous. Minimum interval between subsequent search attempts is 1
	second.
	1	Medium. Minimum interval between subsequent search attempts is 10
	seconds.
	2	Slow. Minimum interval between subsequent search attempts is 30 seconds.
	3	Fast. Minimum interval between subsequent search attempts is 5 seconds.
	The default value is 1, before it was changed for the first time.
<mode>	This value defines the search mode. The mode defines whether network selection and
	registration are performed automatically by the G24-L, or whether the selection is
	forced to the specific operator to which the G24-L is registered to at a given moment.
	0	Automatic
	1	Manual
	The default value is 0, before it was changed for the first time.
Example
AT+MFS=?		//Test command
+MFS: (0-3),(0,1)
OK
AT+MFS?		//Read command
+MFS: 1,0
OK
AT+MFS=3		//Set only Frequency of search
OK
AT+MFS?
+MFS: 3,0
OK
AT+MFS=2,1		//Set Frequency of search and search mode.
OK
AT+MFS?
+MFS: 2,1
		//POWER CYCLE phone
AT+MFS?		//Previous values restored after power up.
+MFS: 2,1
OK

AT+MFS=0

OK AT+MFS? +MFS: 0,1

OK

3-128 G24-L AT Commands Reference Manual April 15, 2008