PIONEERPOS G24-LC manual 20 +MCST Parameters, At+Mcst?, AT+MCST=1, No Carrier +MCST

Chapter 3: AT Commands Reference

+MCST Parameters

The following table shows the +MCST parameters.

				Table 3-20: +MCST Parameters
<Parameter>				Description
<n>	0 - Disable MCST unsolicited indication
	1	- Enable MCST unsolicited indication
<state>	1 -			Idle call state
	2	-		Single incoming call
	3	-		Single call active
	4	-		Multi-party call active
	5	-		Single call held
	6	-		Multi-party call held
	7	-		Dual call (fully connected active call and held call)
	8	-		Dual multi-party call active
	9	-		Dual multi-party call held
	10		-	Single active call plus call waiting
	11 -			Multi-party call active plus call waiting
	12		-	Single call held plus call waiting
	13		-	Multi-party call held plus call waiting
	14		-	Dual calls plus call waiting
	15		-	Dual multi-party calls active plus call waiting
	16		-	Dual multi-party calls held plus call waiting
	17		-	Call control busy
	64		-	Calling
	68		- No Service
	69		- No Redial
	72		-	Security Fail
Example
AT+MCST?
+MCST:				// <idle>
AT+MCST=1
OK

atd035684423; +MCST: 17

OK +MCST: 17 +MCST: 255

OK +MCST: 3 +MCST: 17

NO CARRIER +MCST: 1

April 15, 2008 G24-L AT Commands Reference Manual 3-43