PIONEERPOS G24-LC manual +Mapath?, CRLF+MAPATH2, +Mapath=?

Audio

The following diagram shows the audio paths:.

Input

Input voice

H andset Microphone

Voice

H eadset Speaker

H eadset Microphone

Voice

H andset Speaker

Alert/Ringer

A lert Transducer

Output	H andset Microphone	H eadset Speaker
		H andset Speaker
	H eadset Microphone

A lert Transducer

Features:

• Voice

• Key feedback

• Alert

• Ring

Figure 3-6: Audio Paths

Command	Syntax	Response/Action	Remarks
Type
Set	+MAPATH=	OK	The Set command sets the audio path
	<direct>,<accy>	or:	mode. The mode indicates which I/O
	[,<features>]	+CME ERROR: <err>	accessories are now active for the different
			audio features. The <features> field is
			only used for outputs (direct=2).
Read	+MAPATH?	+MAPATH:1(mode	The Read command returns the active
		in),<accy>	input audio accessory and the output
		+MAPATH:2(mode out),	accessory for each feature.
		<accy>,<feature>
		[<CR><LF>+MAPATH:2
		(mode out),
		<accy>,<feature>
		[...]]
		OK
Test	+MAPATH=?	+MAPATH: (list of	The Test command returns the supported
		supported directions),(list	audio directions (input/output),
		of supported	accessories and features.
		accessories),(list of
		supported features
		combinations)
		OK

3-164 G24-L AT Commands Reference Manual April 15, 2008