PIONEERPOS G24-LC manual +MMAR, Motorola Mark As Read, +CMSS, Send Message From Storage

Chapter 3: AT Commands Reference

+MMAR, Motorola Mark As Read

This command handles changing the <stat> attribute of an SM in the G24-L memory location <index>, preferred message storage <mem1>, from "REC UNREAD" to "REC READ". (<mem1> is selected using the +CPMS command.) If the status change fails, +CMS ERROR: <err> is returned.

Command	Syntax	Response/Action	Remarks
Type
Set	+MMAR=<index>	OK
		or:
		+CMS ERROR: <err>
Read			The Read command for +MMAR is
			not defined, and therefore is not
			supported by the G24-L. The G24-L
			returns an error.
Test			The Test command for +MMAR is not
			defined, and therefore is not supported
			by the G24-L. The G24-L returns an
			error.

The following table shows the +MMAR parameters.

Table 3-61: +MMAR Parameters

<Parameter>	Description
<index>	Index of the message to be marked as read, in
	the SMS memory.

Example

AT+MMGR=1

+MMGR: "REC UNREAD","+972544565034",,"04/11/04,09:48:36+08" message text

OK AT+MMAR=1

OK AT+MMGR=1

+MMGR: "REC READ","+972544565034",,"04/11/04,09:48:36+08" message text

OK

+CMSS, Send Message From Storage

This command sends a pre-stored message, written previously using the +CMGW command. The <da>, <toda> parameters are optional. If a DA is given, the message is sent to that address.

April 15, 2008 G24-L AT Commands Reference Manual 3-101