PIONEERPOS G24-LC manual +Cmgl=?, +Mmgl=?

Chapter 3: AT Commands Reference

The +MMGL command does not change the message status. In addition, +MMGL includes a <stat> selection that can be used to query the G24-L for a list of message headers without attendant message data.

Command Type	Syntax	Response/Action	Remarks
Set	+CMGL	If text mode (+CMGF=1) command execution is
	[=<stat>]	successful and SMS-SUBMITs and/or
	or	SMS-DELIVERs:
	+MMGL	+CMGL:
	[=<stat>]	<index>,<stat>,<oa/da>,,[<scts>]
		[,<tooa/toda>,<length>]<CR><LF><data>[<CR><
		LF>
		+CMGL:
		<index>,<stat>,<da/oa>,,[<scts>]
		[,<tooa/toda>,<length>]<CR><LF><data>[...]]
		The parameters <tooa/toda>,<length> refer
		command shows the Text Mode Parameters +CSDH
		and will be shown according to +CSDH settings.
		If text mode (+CMGF=1) command execution is
		successful and SMS-COMMANDs:
		+CMGL:
		<index>,<stat>,<fo>,<ct>[<CR><LF>+CMGL:
		<index>,<stat>,<fo>,<ct>[...]]
		If text mode (+CMGF=1), command execution is
		successful and CBM storage:
		+CMGL:
		<index>,<stat>,<sn>,<mid>,<page>,<pages><CR>
		<LF><data>[<CR><LF>
		+CMGL:
		<index>,<stat>,<sn>,<mid>,<page>,<pages>
		<CR><LF><data>[...]]
		If text mode (+CMGF=1) command execution is
		successful and SMS-STATUS_REPORTs:
		+CMGL:
		<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<
		dt>,<st>[<CR><LF>
		+CMGL:
		<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<
		dt>,<st>[...]]
		In PDU mode (+CMGF=0):
		+CMGL:
		<index>,<stat>,[<alpha>],<length><CR><LF><pd
		u>[<CR><LF>
		+CMGL:
		<index>,<stat>,[<alpha>],<length><CR><LF>
		<pdu>[…]]
		Or
		+CMS ERROR: <err>
Test	+CMGL=?	+CMGL: (list of supported <stat>s)	The Test
	+MMGL=?	+MMGL: (list of supported <stat>s)	command
			lists all the
			supported
			<stats>

April 15, 2008 G24-L AT Commands Reference Manual 3-91