PIONEERPOS G24-LC manual +ICF, DTE-DCE Character Framing, 93 +ICF Parameters, Parity, +Icf?

Hardware Information

+ICF, DTE-DCE Character Framing

This command determines the local serial port start/stop (asynchronous) character framing used by the DCE when accepting DTE commands and transmitting information text and result codes, whenever these are not done automatically. Auto detect framing is not supported.

Command Type	Syntax	Response/Action	Remarks
Set	+ICF=[<format>[	OK	The Set command determines the local
	,<parity>]]	+CME ERROR: <err>	serial port start/stop character framing.
Read	+ICF?	+ICF:	The Read command displays the
		<format>,<parity>	currently selected character framing.
		+CME ERROR: <err>
Test	+ICF=?	:+ICF:(list of	The Test command displays a list of
		supported <format>	supported <format> and <parity>
		values),(list of	values.
		supported <parity>
		values)
		+CME ERROR: <err>

The following table shows the +ICF parameters.

Table 3-93: +ICF Parameters

<Parameter>			Description
<format>	Determines the number of bits in the data bits, the presence (or absence) of a parity
	bit, and the number of stop bits in the start/stop frame.
	1	8	Data, 2 Stop - can be set only with <parity> 4
	2	8	Data, 1 Parity, 1 Stop - can be set with <parity> of	0 or 1
	3	8	Data, 1 Stop (default) - can be set only with <parity> 4
	4	7	Data, 2 Stop - can be set only with <parity> 4
	5	7	Data, 1 Parity, 1 Stop - can be set with <parity> of	0 or 1
	6	7	Data, 1 Stop - can be set only with <parity> 4
	7	8	Data, 1 Parity, 2 Stop - can be set with <parity> of	0 or 1
	8	7	Data, 1 Parity, 2 Stop - can be set with <parity> of	0 or 1
<parity>	Determines how the parity bit is generated and checked (if present).
	0	Odd
	1	Even
	4	No parity (default)

Example

AT+ICF? +ICF: 3,4

OK AT+ICF=? +ICF: (1-8),(0,1,4)

OK AT+ICF=5,1

OK

3-142 G24-L AT Commands Reference Manual April 15, 2008