PIONEERPOS G24-LC +CPOL, Preferred Operators, April 15 G24-L AT Commands Reference Manual 125

Chapter 3: AT Commands Reference

+CPOL, Preferred Operators

This command is used to edit the list of preferred network operators located in the SIM card.

Command
Type	Syntax	Response/Action	Remarks
Set	AT+CPOL=[<index>]	OK	The Set command writes an entry in
	[,<format>[,	or:	the list of preferred operators.
	<oper>]]	+CME ERROR: <err>	Note: The G24-L may also update
			this list automatically when
			new networks are selected.
Read	AT+CPOL?	+CPOL:	The Read command displays all the
		<index1>,<format>,<oper1>	preferred operators that have been
		[<CR><LF>+CPOL:	entered into the list.
		<index2>,<format>,<oper2>
		[...]]
		OK
		or:
		+CME ERROR: <err>
Test	AT+CPOL=?	+CPOL: (list of supported	The Test command displays the
		<index>s),(list of supported	entire index range supported by the
		<format>s)	SIM.
		OK
		or:
		+CME ERROR: <err>
		* Index range is SIM
		dependent

April 15, 2008 G24-L AT Commands Reference Manual 3-125