3Com manual 3Com Router 5000/6000 Family 155 Command Reference, Frame Relay Class view

3Com Router 5000/6000 Family	155
Command Reference

vofr jitter-buffer

Use the vofr jitter-buffercommand to configure a jitter buffer length.

Voice view

voice bandwidth

Use the voice bandwidth command to configure maximum bandwidth for voice calls.

Frame Relay Class view

voice-config

Use the voice-configcommand to enable the DHCP server to send option 184 and suboptions of 184 when it assigns addresses from the global address pool.

DHCP Address Pool view

voice-setup

Use the voice-setupcommand to enter voice view and enable voice services.

System view

voip call-start

Use the voip call-startcommand to configure a call initialization mode for the called GW.

Voice view

voip calledtunnel

Use the voip calledtunnel enable command to enable the tunnel function on the called gateway.

Voice view

voip h323-conftcs-t38

Use the voip h323-conftcs-t38command to enable the voice gateway to include the T.38 capability description in its capability set when it is in H.323 slow-start mode.

Voice view

voip h323-descriptor

Use the voip h323-descriptorcommand to configure the description character string of the voice gateway

H.323.

Voice view

voip timer

Use the voip timer command to set the VoIP-to-POTS timer, or the delay waiting for switching from VoIP entity to backup POTS entity after a VoIP call is failed.

Voice view

vpinstance

Use the vpninstance command to specify a VPN instance.

HWPing Test Group view

vpn-instance-capability simple

Use the routing-table limit command to configure a router as Multi-VPN-Instance CE.

OSPF Protocol view

vpn-target

Use the vpn-targetcommand to create vpn-target extended community for vpn-instance.

MBGP VPN-Instance view

vqa data-statistic

Use the vqa data-statisticcommand to enable counting of voice data.

Voice view

vqa dscp

Use the vqa dscp command to set the global DSCP value in the ToS field in the IP packets that carry the

RTP stream or voice signaling.

Voice view

vqa dsp-monitor

Use the vqa dsp-monitorcommand to set duration for DSP buffer data monitoring.

Voice view

vqa jitter-buffer

Use the vqa jitter-buffercommand to configure jitter buffer depth.

Voice view

vqa performance

Use the vqa performance command to configure the sending or receiving process of voice data to fast or normal forwarding process.

Voice view