
74 | 3Com Router 5000/6000 Family |
| Command Reference |
ft1 clock
Use the ft1 clock command to configure clocking on the
T1-F Interface view
ft1 code
Use the ft1 code command to configure line code format for a
T1-F Interface view
ft1
Use the ft1
Use the ft1
T1-F Interface view
ft1 fdl
Use the ft1 fdl command to set the behavior of the
T1-F Interface view
ft1 loopback
Use the ft1 loopback command to place the
T1-F Interface view
ft1 sendloopcode
Use the sendloopcode command to send remote loopback control code.
T1-F Interface view
ft1
Use the ft1
T1-F Interface view
ft3 (CT3 Interface)
Use the ft3 command to configure the CT3 interface to operate in FT3 mode and to set the DSU mode and subrate for FT3.
CT3 Interface view
ftp
Use the ftp command to set up control connection to the remote FTP server and enter FTP client view.
User view
ftphost
Use the ftp host
User view
ftphost
Use the ftp host
User view
Use the
HWPing Test Group view
ftp server enable
Use the ftp server enable command to enable the FTP server to allow login of FTP users.
System view
Use the
System view
Use the
System view
ftp
Use the ftp
System view
ftp
Use the ftp
This IP address must be a local IP address.