8 | 3Com Router 5000/6000 Family |
| Command Reference |
authentication
Use the authentication command to enable user authentication and authorization for the access service number.
authentication
Use the authentication command to set the IP address, port number and shared key for the primary and secondary TACACS+ authentication servers.
authentication-algorithm
Use the authentication-algorithmcommand to select the authentication algorithm for an IKE proposal.
authentication-client method
Use the authentication-client method command to specify how the DVPN server that applies the DVPN policy authenticates clients. None, CHAP, and PAP are currently available.
authentication-did
Use the authentication-didcommand to enable authentication for all one-stage dial (direct dial) users.
authentication-method
Use the authentication-methodcommand to select the authentication method used by an IKE proposal.
IKE Proposal view
authentication-mode
Use the authentication-modecommand to set the authentication mode at login.
Use the authentication-mode none command to set the authentication mode to none, that is, no authentication at login.
authentication-mode
Use the authentication-modecommand to configure one area of OSPF to support the authentication attribute.
authentication-server method
Use the authentication-server method command to specify a client whether or not to authenticates the
DVPN server it accesses.
authentication super hwtacacs-scheme
Use the authentication super hwtacacs-schemecommand to configure super authentication scheme for a domain.
authorization
Use the authorization command to configure an authorization scheme for the current ISP domain.
authorization
Use the authorization command to set the IP address, port number and shared key for the primary and secondary TACACS+ authorization servers.
authorization-level
Use the authorization-levelcommand to configure a local caller authorization level for the voice entity.
Voice Entity view
auto-config
Use the auto-configcommand to implement the auto-configoperation.
System view
auto-config enable
Use the auto-config enable command to enable auto-config.
System view
auto-execute command
Use the auto-execute command command to set a command to be automatically executed.
