150 | 3Com Router 5000/6000 Family |
| Command Reference |
timer
tUse the timer
RADIUS view
timer
Use the timer
TACACS+ view
timer
Use the timer
R2 CAS view
timer
Use the timer pulse command to configure the persistence time of the register pulse signal of R2 signaling (A3, A4 and A6, etc.).
R2 CAS view
timer
Use the timer
RADIUS view
timer
Use the timer
TACACS+ view
timer retry
Use the timer retry command to configure the value of connection request
MSDP view
timer ring (R2)
Use the timer ring command to configure the maximum time range before the signal tone of R2 signaling is sent.
R2 CAS view
timer
Use the timer
Voice Subscriber-Line view
timer spf
Use the timer spf command to configure the interval for the SPF calculation.
IS-IS view
timer wait
Use the timer wait command to set a timeout period for a probing attempt.
Detect Group view
timer
Use the timer
Voice Subscriber-Line view
timers
Use the timers command to modify value for the three timers, Period update, Timeout and
RIP view
Use the
CE1/PRI Interface view
timestamp
Use the timestamp command to enable the local end to send voice packets with timestamps.
Voice Entity view
tos
Use the tos command to assign a value to the ToS field in the header of HWPing test packets.
HWPing Test Group view
trace interval
Use the trace interval command to configure the interval for information recording in the debugging process, that is, the number of voice packets upon the pass of which a record will be made.
Voice view