3Com Router 5000/6000 Family | 109 |
Command Reference
peer filter-policy
Use the peer filter-policy import command to configure BGP to filter routes received from the peer (group) based on the ACL.
Use the peer filter-policy export command to configure BGP to filter routes advertised to the peer (group) based on the ACL.
peer filter-policy
Use the peer filter-policy import command to have MBGP filter the routes received from the specified peer or peer group based on the specified ACL.
Use the peer filter-policy export command to have MBGP filter the routes advertised to the specified peer or peer group based on the specified ACL.
peer group
Use the peer group command to add a peer to a peer group.
peer ip-prefix
Use the peer ip-prefix import command to configure BGP to filter routes received from the peer/peer group based on the ip-prefix list.
Use the peer ip-prefix export command to configure BGP to filter routes advertised to the peer/peer group based on the ip-prefix list.
VPNv4 view
VPN Instance view
peer ip-prefix
Use the peer ip-prefix import command to have MBGP filter the routes received from the specified peer or peer group based on the specified address prefix list.
Use the peer ip-prefix export command to have MBGP filter the routes advertised to the specified peer or peer group based on the specified address prefix list.
peer label route-capability
Use the peer label-route-capabilitycommand to enable the capability of a peer to process IPv4 routes with labels.
peer mesh-group
Use the peer mesh-groupcommand to configure an MSDP peer to join an Mesh Group.
peer minimum-ttl
Use the peer minimum-ttlcommand to configure the minimum TTL (Time-to-Live) value of the multicast data packets encapsulated in SA messages to be sent to specified MSDP peer.
peer next-hop-invariable
Use the peer next-hop-invariablecommand to configure the invariable next hop when sending routes to EBGP peers.
BGP view
BGP VPN-Instance view
BGP-VPNv4 Subaddress Family view
BGP-IPv4 Multicast Subaddress Family view
peer next-hop-local
Use the peer next-hop-localcommand to configure the next hop in the route to be advertised to the peer group as the address of the local router.
peer next-hop-local
Use the peer next-hop-localcommand to remove the processing of the next hop in routes which BGP will advertise to the peer (group) and set the local address as the next hop.
peer password
Use the peer password command to configure BGP to perform MD5 authentication before setting up a TCP connection.
