3Com manual 803Com Router 5000/6000 Family Command Reference

803Com Router 5000/6000 Family Command Reference

igmp timer other-querier-present

Use the igmp timer other-querier-presentcommand to configure the overtime value of presence of

IGMP querier.

Interface view

igmp timer query

Use the igmp timer query command to configure the interval at which a router interface sends IGMP query messages.

Interface view

igmp version

Use the igmp version command to specify the version of IGMP that a router uses.

Interface view

ignore-lsp-checksum-error

Use the ignore-lsp-checksum-errorcommand to configure the IS-IS to ignore the checksum error of

LSP.

IS-IS view

ike dpd

Use the ike dpd command to create a DPD structure and enter its view.

System view

ike local-name

Use the ike local-namecommand to set the name of the local GW.

System view

ike next-payload check disabled

Use the ike next-payload check disabled command to disable the router to check the next-payload field in the last payload of the IKE negotiation packet during IPSec negotiation for compatibility with other vendors.

System view

ike peer (IPSec Policy view or IPSec Policy Template view)

Use the ike peer command to quote an IKE peer in an IPSec policy or IPSec policy template.

IPSec Policy view

IPSec Policy Template view

ike peer (System view)

Use the ike peer command to configure an IKE peer and access IKE-peer view.

System view

ike proposal

Use the ike proposal command to define an IKE proposal.

System view

ike sa keepalive-timer interval

Use the ike sa keepalive-timer interval command to configure the interval for sending Keepalive packet to the remote end through ISAKMP SA.

System view

ike sa keepalive-timer timeout

Use the ike sa keepalive-timer timeout command to configure a timeout for ISAKMP SA to wait for the

Keepalive packet.

System view

ike sa nat-keepalive-timer interval

Use the ike sa nat-keepalive-timer interval command to configure the NAT keepalive interval for IKE peers.

System view

ima-clock

Use the ima-clockcommand to configure the clock mode of the IMA group.

IMA Group Interface view

ima ima-group

Use the ima ima-groupcommand to add the ATM E1/T1 interface to the specified IMA group. If the specified IMA group does not exist, it is created first.

ATM E1/T1 Interface view

ima-test

Use the ima-testcommand to set a test pattern for testing the connectivity of the specified link to the rest of the IMA group.

IMA Group Interface view