
3Com Router 5000/6000 Family | 97 |
Command Reference |
|
|
|
| |
Use the |
|
a certain VLAN. | System view |
| |
|
|
| |
Use the |
|
need to use this command when MD5 authentication on ISIS is required between your router and a 3Com |
|
device. | ISIS view |
| |
|
|
mdl (CT3 Interface) |
|
Use the mdl command to configure MDL message detection/sending on the CT3 interface. |
|
CT3 Interface view
memory
Use the memory command to configure the safety value and lower limit of the router idle memory.
System view
memory
Use the memory
Use the memory
System view
memory
Use the memory
Use the memory
System view
mfc (R2 CAS)
Use the mfc command to maintain of MFC channel of the specified timeslot.
R2 CAS view
mfr
Use the mfr
MFR Interface view
mfr fragment
Use the mfr fragment command to enable FRF.16 fragmentation on the MFR bundle.
MFR Interface view
mfr
Use the mfr
Frame Relay Interface view
MFR Interface view
mfr
Use the mfr
Frame Relay Interface view
mfr retry
Use the mfr retry command to set the maximum times that a frame relay bundle link can resend hello message when waiting for a hello acknowledgement message.
Frame Relay Interface view
mfr timer ack
Use the mfr timer ack command to set the time of waiting for hello acknowledgment message before frame relay bundle link resends hello message.
Frame Relay Interface view
mfr timer hello
Use the mfr timer hello command to set the interval for a frame relay bundle link to send hello message.
Frame Relay Interface view
mfr
Use the mfr
MFR Interface view