3Com 5000/6000 manual Use the interface command to enter Ethernet port view

82	3Com Router 5000/6000 Family
	Command Reference

info-center monitor channel

Use the info-center monitor channel command to have the info-center output information over the specified channel to the user terminal.

System view

info-center snmp channel

Use the info-center snmp channel command to set the information channel for SNMP.

System view

info-center source

Use the info-center source command to add records to an information channel.

System view

info-center synchronous

Use the info-center synchronous command to enable synchronous terminal output.

System view

info-center timestamp

Use the info-center timestamp command to set a time stamp format for the system information output to the information channels except for the log host.

System view

info-center timestamp loghost

Use the info-center timestamp loghost command to set a time stamp format for the system information output to the log host.

System view

info-center trapbuffer

Use the info-center trapbuffer command to enable the trap buffer, set its size and the channel that outputs information to it.

System view

interface

Use the interface command to create a P2MP or P2P subinterface.

System view

interface

Use the interface command to enter the specified interface view or create a logical interface or subinterface.

System view

interface

Use the interface command to enter Ethernet port view.

System view

interface atm

Use the interface atm command to enter the view of the specified ATM E1/T1 interface.

System view

interface bridge-template

Use the interface bridge-templatecommand to create a bridge template interface, connecting the specified bridge set to the routing network.

System view

interface dialer

Use the interface dialer command to create a dialer circular group for the Circular DCC, or configure a dialer interface for the Resource-Shared DCC.

System view

interface encrypt

Use the interface encrypt command to enter encryption card interface view.

System view

interface ethernet

Use the interface ethernet command to create an Ethernet subinterface.

System view

interface ima

Use the interface ima command to enter the specified IMA group interface view.

System view

interface logic-channel

Use the interface logic-channelcommand to create a logical channel interface.

System view