3Com 5000/6000 manual Use the info-center enable command to enable the info-center

Models: 5000/6000

1 162
Download 162 pages 60.87 Kb
Page 81
Image 81

3Com Router 5000/6000 Family

81

Command Reference

 

impedance

Use the impedance command to configure the current electric impedance on a voice subscriber-line.

FXO Voice Subscriber-Line view

import-route

Use the import-routecommand to redistribute routes from other protocols.

BGP view

import-route

Use the import-routecommand to import routing information from other protocols to BGP.

IPv4 Multicast Subaddress Family view

import-route

Use the import-routecommand to configure IS-IS to filter the redistributed routes.

IS-IS view

import-route

Use the import-routecommand to redistribute the information of another routing protocol.

OSPF view

import-route

Use the import-routecommand to redistribute the routes of other protocols into RIP.

RIP view

import-route isis

Use the import-route isis level-2 into level-1command to enable routing information in a Level-2 area to be redistributed to a Level-1 area.

IS-IS view

import-route ospf

Use the import-route ospf command to enable to import OSPF route.

BGP Unicast/Multicast view

MBGP VPN-Instance Address Family view

import-source

Use the import-sourcecommand to configure which (S, G) entries in the domain need to be advertised when a MSDP originates an SA message.

MSDP view

info-center channel

Use the info-center channel command to assign a name to the information channel specified by channel-number.

System view

info-center console channel

Use the info-center console channel command to have the info-center output information to the console over the specified channel.

System view

info-center enable

Use the info-center enable command to enable the info-center.

System view

info-center logbuffer

Use the info-center logbuffer command to enable the log buffer and specify the channel for system information output as well as the size of the log buffer.

System view

info-center logfile

Use the info-center logfile channel command to have the info-center output system information to the log file.

System view

info-center loghost

Use the info-center loghost command to have the info-center output information to the log host.

System view

info-center loghost source

Use the info-center loghost source command to specify the source address in the packets destined to the log host.

System view

Page 81
Image 81
3Com 5000/6000 manual Use the info-center enable command to enable the info-center